VVDI2 vs Zed Full what is better for VAG & BMW?

VVDI2 vs ZED FULL what tool is better for VAG and BMW key programming?

Look here:

Rely 1: I have Zed-Full and to be honest it’s a bit of a disappointment. Slow bringing out anything new on the VAG front. Older A3’s and TT’s never seems to be able to read the pin when other tools do fine. Not great on newer Marelli dash especially doesn’t like the one in the VW UP. Never manages to read any CAS modules by OBD (used to ok but hasn’t successfully read a single one for months) on top of that it’s expensive to run.
I’m about to order VVDI2 (Would have updated my AVDI but not going to be forced into dealing with KAP)

vvdi2-key-programmer-1

Reply 2: i have vvdi2 and zed full. for vag and bmw vvdi2 is best for me
zed full is good too for other marks

 

Reply 3: I had Zedfull for almost two years.
The day I bought it was happy day that week.
The day I sold it out was happiest day in my life  .
VAG mostly if I couldn’t do with other tools Zedfull also cannot (PIN CODE).
Pretty expensive device for using indeed on tokens. Learn key for Passat B5 can cost about 25 – 30 tokens if procedure go okay (example),
pin code 20 + 5 or 10 for learning. Almost 20 years old car.
Hah chinese 100$ cost device can do the job with blink. These cars should be there for free for the price device cost.
VAG immo 4 chinese ID48 cannot learn but tokens take. Support says: “Use original or zedfull ID48” .
Basically support not very good, they reply sometimes . If you loose some tokens because the device CANNOT or wrong transponder you never gain them back but the claim before buy was different.
Did not try BMW when you see how many tokens they want  – 50 tokens (about 35$) for key. What do you think for try?

Mitsubishi smart key cannot add, chinese device learn key with blink.
This device is for dummies… click there … click here .. done. For begginers maybe good but not for professionals.
I was disappointed with the device and support.

 

Reply 4: I have both, vvdi2 is better, ZED FULL always delay with their softwares and updates compared with other tools.

 

Reply 5: i agree. also have a zedfull, in bmw is my only option (have a tcode pro but dont buy bmw modules). made a few bmw, a x5 and x6 by obd and work fine, and a mini too. in vag is not very updated, sometimes in vw brazil have a few issues, for ex: trying to make a all key lost 2015 voyage, read pin ok, and tell me wait 15 min for security, then make weird config and dashboard say key 2-6, dont accept more keys, try again, wait another 15min, and again, i want 2 key and zedfull put 6 in programming. tcode make ok in the first attempt

 

Reply 6:  if you need good tool for BMW CAS/MB EZS (read and write MB IR key), buy xhorse vvdi2. it makes keys over OBD (90% of VAG and BMW can be done by OBD in VVDI2) and includes all the VVDI functions

 

In summary, 

If you looking only for VAG + BMW , then VVDI2 and VVDI prog is way to go. No need any other tool. In VVDI2 you have also programmer similar to Tango that you can make keys buy dump, but 90% of VAG and BMW can be done by OBD in VVDI2.

 

VVDI programmer don’t have OBD it’s only for bench programming.

Good for CAS4, FRM, EZS, EWS4 and many more.

 

 

VVDI2 BMW key programming:

VVDI2 BMW + OBD Authorization Service

VVDI2 BMW CAS4+ Authorization Service

VVDI2 BMW FEM/BDC Authorization Service

 

VVDI2 VAG key programming:

VVDI2 VW AUDI 4th 5th IMMO Authorization Service

VVDI2 AUDI 5th IMMO Authorization Service

Audi A6L 2013 5th immo add key using Xtool x100 pad2 with KC100 adapter

Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs.

Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs. 图1 The first one key is original and the remote is working, the second one is blank to be programmed. 图2 1. I complete a Youtube video, attach here: <iframe width="560" height="315" src="https://www.youtube.com/embed/MjAmFxDEl2Q" frameborder="0" allowfullscreen></iframe> Read me: www.xtooltech.com marked in this video is the official site of Xtool x100 pad2. www.uobdii.com is a trustworthy shop I bought and will buy Xtool x100 pad2 2. If you have trouble to watch the video, please go on reading the step-by-step procedure as below: Tap "X100 pad2" on the screen. Tap "VW/Audi Skoda / Seat" 图3 Tap "4th/5th immobilizer system". 图4 You will have 2 options "4th immobilizer system" and "5th immobilizer system", Audi A6L 2013 is 5th immobilizer system. 图5 pad2 can't identify the VIN code because the ignition doesn't turn on, go to switch the ignition on. 图6 Come to 5th immobilizer system function menu. 图7 1). Read immokey. 图8 9 10 2). Show security data Have 3 keys. 图11 3) Make dealer key. Please plug the KC100 into tablet, press (OK) to continue. The KC100 adapter indicator turn blue means it powers on. 图12 13 14 Put the original key into the coil of KC100 adapter. 图15 Then put the blank key that ready to add to the coil of KC100 adapter 16 Writting key... Create dealer key success. 17 4) Learn the key. Turn the ignition on, click "OK". Read the note shown as below. 图18 Input the number of keys to match 19 Put the blank key to the sensor area. 20 The first one learn successfully. 21 Then put the second one to learn, after learn with success, it prompts "Learning success" 22 Finish match the key. 23 Tap "Return" button to exit the system. To identify the two keys are working or not. They are working fine. 24 Now I take one key outside of the car and leave one key in the car. Start the engine. the first key can turn on. 25. Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok. The remote is working. Done! The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.

The first one key is original and the remote is working, the second one is blank to be programmed.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-02

  1. I complete a Youtube video, attach here:

Read me:

www.xtooltech.com marked in this video is the official site of Xtool x100 pad2.

www.uobdii.com is a trustworthy shop I bought and will buy Xtool x100 pad2

  1. If you have trouble to watch the video, please go on reading the step-by-step procedure as below:

Tap “X100 pad2” on the screen.

Tap “VW/Audi Skoda / Seat”

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-03

Tap “4th/5th immobilizer system”.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-04

You will have 2 options “4th immobilizer system” and “5th immobilizer system”, Audi A6L 2013 is 5th immobilizer system.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-05

pad2 can’t identify the VIN code because the ignition doesn’t turn on, go to switch the ignition on.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-06

Come to 5th immobilizer system function menu.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-07

1). Read immokey.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-08 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-09 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-10

 

2). Show security data

Have 3 keys.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-11

3) Make dealer key.

Please plug the KC100 into tablet, press (OK) to continue.

The KC100 adapter indicator turn blue means it powers on.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-12 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-13 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-14

Put the original key into the coil of KC100 adapter.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-15

Then put the blank key that ready to add to the coil of KC100 adapter

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-16

Writting key…

Create dealer key success.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-17

4) Learn the key.

Turn the ignition on, click “OK”.

Read the note shown as below.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-18

Input the number of keys to match

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-19

Put the blank key to the sensor area.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-20

The first one learn successfully.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-21

Then put the second one to learn, after learn with success, it prompts “Learning success”

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-22

Finish match the key.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-22

Tap “Return” button to exit the system.

To identify the two keys are working or not.

They are working fine.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-24

Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.

audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-25

Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok.

The remote is working.

Done!

The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.

Program Golf 6 all keys lost with Xhorse VVDI2 service mode

Have golf 6 all keys lost to program new keys with Xhorse VVDI2 VW or VVDI2 full version, it is supposed to do service mode, please do as the below procedure.

—–On Kessy system you have to have Kessy Key brand new or Buy form Dealer.

If you use used key and chnage transponder car will start only if you put key close to coil ( where is normaly igntion tumbler is)

Remove dash , Read eeprom with programmer and save originla file.

Do service mode , I do this manual way, open originla file in Hex Editor add at line 1420 and 1430 all FFFFFFF.

This way you do not loose VIN and ABS stay same .

Write molded file back to cluster and put cluster in car.

On Kessy car you need to bridge at OBD pin 1 and 16 to get Ignition On.I would make with little switch because you will need to give ignition On/OFF when learn keys. Connect to cluster and read Sec. block. After susses , you need to write original eeprom to cluster.

VERY IMPORTANT : Do not EXIT any function till all is done.

If you have key form dealer then you can learn it right a way ,If you have New Kessy key then you need to read Immo block again , then make a dealer key .

After this press button ADD KEY. Then choose second option Learn Key with security code and follow instruction.. If you want to learn only 1 key you will see 0-1 then 1-1 .

At it end before you press OK on pop up message you need to turn ignition Off/On After THAT you see 1-1, then press OK on Pop up message and wait till 1-1 goes away. All keys are learn successful.

 

—–Other way if you have only Used key with new ID48 ,:

Remove dash , Read eeprom with programmer and save originla file.

Do service mode , I do this manual way, open originla file in Hex Editor add at line 1420 and 1430 all FFFFFFF.

This way you do not loose VIN and ABS stay same .

Write molded file back to cluster and put cluster in car.

On Kessy car you need to bridge at OBD pin 1 and 16 to get Ignition On.I would make with little switch because you will need to give ignition On/OF when learn keys. Connect to cluster and read Sec. block. After susses , you need to write original eeprom to cluster.

VERY IMPORTANT : Do not EXIT any function till all is done.

Then read Immo block again ,

Make a dealer key first . After that press ADD KEY , then use frist option add key direct to immo block . After all done reset cluster ,remove bridge on OBD pin 1 and 16 . Put key close to Immo coil and start car.

 

That is service mode only needed for c32 c64 clusters. Please look at a photo which numbers need do service mode to do all keys lost

VDX30vD

Tips to follow:

From 1 to 7. when you have all key lost .

#1 is cars with Micronas dash and for Service mode use VVDI and it needs in most cars made 2007 and up, Before that all key lost will work direct OBD.

#2 it is different service mode that I gave solution is other post

#3 to 7 my solution works in all of them.

 

Service mode only need if ALL KEy LOST, otherwise read IMMO data and make a KEy LEARn via IMMO DATA FILE

if you confuse what cluster choice, post cluster p/n and manufacture date.

 

Big thanks to @yugo45 on DK forum.

 

VVDI2 vs Tango: VVDI2 Wins in OBD, VAG, BMW

Topic: VVDI2 or Tango? Which is better for auto key programming?

Program keys: VVDI2 via OBD, Tango from dump

If you are going to make keys from dump and reading with a programmer buy Tango.
If you are looking to make keys over OBD buy VVDI2 is a good tool for BMW CAS/MB EZS. (read and write MB IR key)

Tango more features, VVDI2 good for OBD

Better buy VVDI2 with VVDI Prog

I personally prefer Tango good support and more features, xhorse it is also a very good for obd.
If you buy VVDI2 i also recommend complement with VVDI programmer.

Tango has guides with pics, free with standard tool

I don’t know VVDI2… but I have tango and it’s excellent so long as you have good programmers too like xprog etc. Most makes/models have guides with pics. Also many makers are free with standard tool and you can just add when you need

VVDI2 + Tango better than Zed full

If you mean original Tango and VVDI2 full…than this group will be better than zed full, thats my opinion…but there is a lot of car that you will need to remove BCM’s, immo’s…etc because vvdi2 and tango are more eeprom based tools, except vvdi2 making bmw and vag over obd2, skp900 and obdstar are obd2 tools but cant help you with fiat, opel, renault and with some few brands

VVDI2 + VVDI Prog good for VAG + BMW

If you looking only for VAG + BMW , then VVDI2 and VVDI prog is way to go. No need any other tool. In VVDI2 you have also programmer similar to Tango that you can make keys buy dump, but 90% of VAG and BMW can be done by OBD in VVDI2.

VVDI programmer don’t have OBD it’s only for bench programming.

Good for CAS4, FRM, EZS, EWS4 and many more.

VVDI2 = VVDI + Tango + …

VVDI 2 includes all the VVDI functions, the function of Tango…. has improved remote control generation and chip identification, and also enhanced the coil’s stability
Moreover, you don’t have to connect VVD2 with a computer or other devices to identify chip or detect remote frequently.

Conclusion:

VVDI2 wins! Wins in OBD making keys! Wins in VAG + BMW key programming.

VVDI2 BMW:

Correct odometer
Generate key
Unlock key
Fix CAS computer

VVDI2 VAG:

Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools

VVDI2 key programmer:

Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control

VVDI2 V3.0.1 Software Download on Mega

Free download xhorse the best VVDI2 software v3.0.1 for basic diagnosis, ecu programming, key programming, etc.

Free download xhorse the best VVDI2 software v3.0.1 for basic diagnosis, ecu programming, key programming, etc.

VVDI2 v3.0.1 download link:

https://mega.nz/#!isI0xCiC!vmE7scRF5I-jF1m1wk_uhUOBjdwvTxt2c1gnqRWbJDg

Xhorse vvdi2 for sale:

VVDI2  V3.0.1  Software Download on Mega

VVDI2 full kit price: $2,189

Date: 2017-01-16

Update requirement: needs vvdi2 firmware V3.0.0
Update info:

VVDI2 VAG V3.0.1
1. Adapt unit: Fixbug for adapt Touareg/Phaeton/A8/Cayenne kessy module
2. Copy 48 transponder: Support query the last success result from server
3. Improvement for read MED17/EDC17 via OBDII
4. Improvement for read BCM2 via BDM programmer
5. Language bugfix in english system
6. Bugfix

VVDI2 BMW V3.0.0
1. For latest ISTAP CAS:9389115, 9389116, 9395656, 9395657, support add key via OBDII, require update CAS flash
2. Bugfix for information display in file make key when load 2K79X EEPROM dump
3. Language bugfix in english system
4. Bugfix

VVDI2 Porsche V3.0.0
1. Language bugfix in english system
2. Bugfix

VVDI2 PSA V3.0.0
1. Language bugfix in english system
2. Bugfix

Xhorse VVDI2 Transponder key Programmer V3.0.0
1. Language bugfix in english system
2. Improvement for copy transponder: support VVDI 46 transponder
3. Improvement for copy remote: Add remote type, support save/write remote copy data
4. Immobilizer data tool: Suzuki Alto 93C56 bugfix
5. Immobilizer data tool: Improvement for toyota G-Transponder
6. Bugfix

J2534 V3.0.0
1. Bugfix

vvdi 2 Online Upate Tool V3.0.0
1. Language bugfix in english system
2. Bugfix

vvdi 2 Quick Start V3.0.0
1. Bugfix

Superobd SKP900 program smart remote Nissan Sylphy 2013 year

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.

Tool to use:

Superobd SKP900, $429 at uobdii.com

Nissan Calculator, $139 at uobdii.com

superobd-skp-900-7new-pin-code-caculator-for-nissan-6

Purpose:

Calculate Pin code and then program smart remote key

Procedure:

  1. This is smart remote key …

nissan-smart-remote-key-01

  1. Turn ignition on

turn-ignition-on-02

  1. Open Superobd SKP900, come to menu then choose “Nissan” under IMMOBILIZER.

skp900-nissan-03

  1. Select “New Structure”.

skp900-nissan-04

  1. Select “Smart key”, loding…

skp900-nissan-05

  1. Select “KEYLESS SYSTEM”.

skp900-nissan-06

  1. Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.
  1. Read BCM code

skp900-nissan-08

  1. Insert key and turnning on “Yes” to continue

skp900-nissan-09

  1. Read out BCM code

skp900-nissan-10

  1. Use Nissan Calculator to find Pin code.

skp900-nissan-11

  1. Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator

skp900-nissan-12

  1. Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.

skp900-nissan-13

  1. Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

skp900-nissan-14

  1. All keyless will be deleted.

skp900-nissan-15

  1. Enter Pincode 2166

skp900-nissan-16

  1. Check INPUT VALUE 2166 “Yes” OK “No” Return.

skp900-nissan-17

  1. Activate success wait new keyless.

skp900-nissan-18

  1. Key number 1 and number 2

skp900-nissan-19

  1. Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.

skp900-nissan-20 skp900-nissan-21 skp900-nissan-22 skp900-nissan-23

  1. Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.
  1. Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.

skp900-nissan-24

  1. Test remote, it can work.

skp900-nissan-25

OBDSTAR X300 Pro3 Program Toyota Esport H chip IMMO

This blog will show you how does OBDSTAR X300 Pro3 (Key master) program Toyota H chip remote key. Very easy to operate. Enjoy it!

This blog will show you how does OBDSTAR X300 Pro3 (Key master) program Toyota H chip remote key. Very easy to operate. Enjoy it!

 

Device:

OBDSTAR X300 PRO3

KD900 Remote Maker

Two keys: original(master) key, new(valet) key

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-1

Following the procedure to program

First, make remote with KD900 and insert chip H (47)

Next, begin programming the chip with obdstar x300 key master

Choose IMMOBILIZER -> TOYOTA/LEXUS -> TOYOTA/LEXUS V31.03

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-2

X300 Pro3 is loading…

Initializing…

Authorizing…

Then choose “Immobiliser” and press ENT to continue

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-3

Type 2 (with G/H)

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-4

Add a key

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-5

X300 key master will show you the information interface, read it in detail and press ENT

(1 master key is needed to erase or add other key.

How to identify master key and valet key?

Insert key into ignition switch, if immobiliser light isn’t bright, that is master key, if it is bright for 1 sec and then extinguished, that is valet key)

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-6

Then insert programmed original key and switch ignition on, press ENTER to continue

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-7

Next, insert new key, keep the ignition switch off and wait until security light go off

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-8

Light on

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-9

Light off

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-10

Use the new key start success!

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-11

Next, program remote with X300 Pro3

Go back to TOYOTA/LEXUS V31.03 and choose “Remote”

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-12

Type 2

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-13

Add remote

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-14

Then switch ignition on and open the drive door

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-15

Press LOCK and UNLOCK button together for 1 sec within 30sec then press LOCK once

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-16

Done! Program success!

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-17

Try to use the remote, press LOCK button, the door locked

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-18

Press UNLOCK button, the door unlocked

OBDSTAR-X300-Pro3-program-Toyota-Esport-H-chip-IMMO-19

It’s working now!

 

Program 2012 Mitsubishi Pajero key by OBDSTAR X300 PRO3 Key Master

This blog show you steps to program remote transponders for 2012 Mitsubishi Pajero Sport using OBDSTAR X300 PRO3 Key Master! Check below:

This blog show you steps to program remote transponders for 2012 Mitsubishi Pajero Sport using OBDSTAR X300 PRO3 Key Master! Check below:

(Generate two new transponder keys by KD900 remote maker in advance)

Step1. Choose “Immobilizer”→ “Mitsubishi”→ “Mitsubishi V30.16” → “China” → “Select from type”.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-1

Choose “L200 Triton” → “2011-” → “Type 1”.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-2 obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-3

Step2. Choose “Program keys” function.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-4

Use first new key to turn on ignition then confirm.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-5

OBDSTAR Key Master programs the first key successfully!

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-6

Step3. Press the ENT button to continue program next one. Insert second key and turn ignition on, press the ENT button.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-7

OBDSTAR Key Master programs the second key successfully! Press the ESC button to stop key programming.

Key programming complete!

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-8

Step4. Back to choose “Add remote”.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-9

It reminds you this action will erase all remotes. Press ENT button.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-10

Now ordermy press the two remote key’s Unlock button for 3 times in 30 seconds.

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-11

The whole procedure complete! Two new Mitsubishi Pajero transponders are programmed successfully by OBDSTAR X300 PRO3 and KD900 programmer!

obdstar-x300-pro3-key-master-program-mitsubishi-pajero-remote-12

OBDSTAR X300 Pro3 Programs SUZUKI Swift 2013 IMMO key

OBDSTAR X300 Pro3 Key master performs many useful functions including key programming + Odometer Adjustment +EEPROM/PIC+OBDII diagnosis.

OBDSTAR X300 Pro3 Key master performs many useful functions including key programming + Odometer Adjustment +EEPROM/PIC+OBDII diagnosis. Here is a tutorial on programming immo keys for SUZUKI Swift 2013 with key master.

SUZUKI Swifi 2013 and Key

X300-PRO3-Program-SUZUKI-Swift-immo-key-1

Detailed procedure:

Enter IMMOBILISER function menu, choose vehicle model “SUZUKI”

X300-PRO3-Program-SUZUKI-Swift-immo-key-2

Enter “SUZUKI V30.06”

X300-PRO3-Program-SUZUKI-Swift-immo-key-3

Then choose “Smart key system”

X300-PRO3-Program-SUZUKI-Swift-immo-key-4

Choose “Alivio”

X300-PRO3-Program-SUZUKI-Swift-immo-key-5

“Program smart key”

X300-PRO3-Program-SUZUKI-Swift-immo-key-6

Choose “Without Pin” option, with this option, You do not need to pay to get the Pincode from workshops.

X300-PRO3-Program-SUZUKI-Swift-immo-key-7

X300 Pro3 will remind you after performing this function, all keys will be erased. We have only one key, so just press ENTER button to continue.

X300-PRO3-Program-SUZUKI-Swift-immo-key-8

It is configuring the system, wait…

And You will find the security blink for waitting new key

X300-PRO3-Program-SUZUKI-Swift-immo-key-9

Then you should input the current year and month, press ENTER

X300-PRO3-Program-SUZUKI-Swift-immo-key-10

X300 Pro3 key master will prompt you stick the new key to the start button

X300-PRO3-Program-SUZUKI-Swift-immo-key-11

Do it like this and press ENTER button.

X300-PRO3-Program-SUZUKI-Swift-immo-key-12

You will hear 2 beeps to registered key, Security light go off

X300-PRO3-Program-SUZUKI-Swift-immo-key-13

Program SUZUKI Swift key successfully with X300 PRO3! Press ESC to exit the system.

X300-PRO3-Program-SUZUKI-Swift-immo-key-14

Test remote key

X300-PRO3-Program-SUZUKI-Swift-immo-key-15

Done! Enjoy your new key!