Yanhua Mini ACDP Program Keys for Porsche 1N35H BCM

Recently,Yanhua team launch new product—Yanhua Mini ACDP Porsche Module.It can suppot add new keys & all keys lost for Porsche vehicle.Here UOBD2 show the guide on how to use it to add new keys for Porsche 1N35H BCM.Hope our auto locksmiths can gain good deal of enlightenment from this operation.

Note:Yanhua Mini ACDP Porsche module support Porsche models from 2010-2018 new keys adding and all key lost!

Procedures:

Connect Yanhua Mini ACDP module to the Porsche BCM

https://www.eobdtool.co.uk How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (2) How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (3) How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (4)

 

Run Mini ACDP software,enter the main menu to select “Porsche”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (5)

Add key for New Porsche

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (6)

ICP IMMO

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (7)

MC9S12XEP100(Mask 1N35H)

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (8)

Add key (auto mode)

9

Note:

1.Please prepare OBP+ICP adapter,BCM interface board,BCM module,BAV adapter and blank key.

2.It is forbidden to cut ACDP power off during the process of adding a key,otherwire adding the key will be error.

3.Please store the original and programmed EEPROM/DFLASH data as prompt.

Click “OK” to continue

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (10)

Check the note massage below,and then click “OK” to continue

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (11)

Checking pin,please wait…

It will show the pin detection status,if all of them have good connection,click ”Continue”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (12)

Configuring adapter,please wait…

It is detected that the BCM module chip has been encrypted,Do you want to continue?

Click “Continue”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (13)

Configuring adapter,please wait…

Reading PFLASH data,please wait…

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (14)

Now you need to save the PFLASH data file,click “OK”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (15) How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (16)

 

It will show you the PFLASH data file save path as below

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (17)

Read EEPROM/DFLASH data,please wait…

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (18)

Please save the original EEPROM data file,click “OK” to continue

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (19)

It will show you the EEPROM data file save path as below

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (20)

Please save the original DFLASH data file.

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (21)

It will show you the EEPROM data file save path as below

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (22)

Then Yanhua Mini ACDP Porsche software will show the IMMO information (please make sure that information is correct),click “Continue”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (23)

Check the note massage,and follow the operation to connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter.Then click “OK” to continue

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (24) How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (25)

 

Reading key information,please wait…

Current key ID:6BFF1423

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (26)

You can now select a number for adding a key(the gray number is not optional,that mean this key number is already used or current key is already exit)

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (27)

Programming key,please wait…

Please store the DFLASH data file after adding a new key.

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (28)

It will show you the EEPROM data file save path

Check note massage below,and then click “OK” to continue

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (29)

Checking pin,please wait…

Also it will detect the pin status,click “Continue”

Click “Continue”

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (30)

Now it show the immo information as below,and you will see the key number 06

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (31)

Then it Yanhua acdp mini will perform adapter configuring,chip decrypting,EEPROM/DFLASH data writing and chip data verifying,just wait…

Finally,it will prompt you adding key completed.

Install the BCM module back to vehicle,and test the key you just adding.

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H BCM (32)

Done!

 

And here is the video guide:

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H

Why NEWBIES should have an ACDP Mini for BMW programming?

Here are notes shared by real professionals working for uobdii.com. 3 features of Yanhua ACDP Mini are highlighted for BMW CAS and FEM/BDC programming, esp. for newbies.

 

  1. Require no soldering experience:

ACDP application with Help file – how to connect

ACDP-Mini-NO-Soldering-Wiring-1 ACDP-Mini-NO-Soldering-Wiring-2

  1. Less risk when you do programming:

Automatic test of adapters connection, will help avoid data lost because of bad communication.

(cannot go to the next step if the connection is not in a good way)

ACDP-Mini-NO-Soldering-Wiring-3

 

  1. No worries of data lost!

 

Easy to program FEM without soldering:

 

For BMW with a good FEM module,

 

FEM module data restore:

ACDP can be used with FEM module in a good condition but with data issues.

No worries! No module data lost.

Note: You’d better know the data version. If not, choose the newest.

Then the matching should be synchronized with the original device.

Data cannot be as expensive as before coz data now can be restored.

 

For BMW with a replacement of FEM modules,

 

FEM module data backup and write:

ACDP is used when there is something wrong with the FEM module.

You should have a working FEM module to write data that’s read from the old and bad FEM.

 

ACDP has its own adapter for CAS3+/CAS4+:

 

Recommendation: disassemble the CAS3+/CAS4+ module for programming

ACDP has its adapter for CAS3+/CAS4+ programming.

If done via OBD2, it’s a must to lower the version with ALL tools.

And in the process of downgrading, The data might get lost or leave historical issues that fault cannot be cleared.

So, you’d better disassemble the CAS3+/CAS4+ module and connect it via an specialized adapter for programming.

Please clear some contact points if with thick three anti-paint.

No need soldering chips and wiring

 

 

Tips of using ACDP App via a mobile:

Bluetooth turns ON on a mobile, search BT and find out ACDP, then connected

Note: DO NOT manually pair Bluetooth connection.

If you fail to find out ACDP BT, turn on location service, usually in Settings, security and privacy

 

WiFi is connected with a router or a location service

All data communication is done via WiFi

Note: If you fail to match the key in the process, check the WiFi signal is good or not and also check the WiFi name (NO Chines or other special characters! Only English and numbers available) and password (correct?)

5G cannot be supported!

 

 

ACDP-Mini-NO-Soldering-Wiring-4

Videos: How to use Yanhua ACDP Mini for BMW programming?

Yanhua Mini ACDP CAS4 Programing Without Welding

<iframe width=”854″ height=”480″ src=”https://www.youtube.com/embed/ZRa_dU-g3JI” frameborder=”0″ allow=”autoplay; encrypted-media” allowfullscreen></iframe>

 

BMW CAS3+ Programing by Yanhua Mini ACDP Without Welding

<iframe width=”854″ height=”480″ src=”https://www.youtube.com/embed/4jvLDg24yzE” frameborder=”0″ allow=”autoplay; encrypted-media” allowfullscreen></iframe>

 

Yanhua Mini ACDP for BMW FEM All Key Lost without soldering welding

<iframe width=”854″ height=”480″ src=”https://www.youtube.com/embed/xXt2jlAOLuc” frameborder=”0″ allow=”autoplay; encrypted-media” allowfullscreen></iframe>

Using Tips for Yanhua Mini ACDP APP

As the Yanhua Mini ACDP released their own APP, many users have tried to install the ACDP APP on their phones. And there are some notes for you when installation after we collected the feedback of our users.

 

Install the ACDP from APP Store:

Both IOS and Android system could download ACDP APP through the code above.

 

  1. Fail to install with a note ”Untrusted Enterprise Developer”

Solution: you should do the trusting step before install. Find Setting -> General -> Manage Device -> choose Nanning yanhua. Only when trusting the APP, can the phone begin to install it.

 

  1. Fail to download

ACDP Fail to download base resources with a note below, after tap Yes, ACDP still continues to download but fail again.

Solution:

  1. WIFI, check the network
  2. ACDP don’t support background download, keep the APP downloading
  3. ACDP won’t download when hibernation mode, keep the screen on.

 

Yanhua Mini ACDP Key Programmer now is available in eobdtool.co.uk: €209

http://www.eobdtool.co.uk/wholesale/yanhua-acdp-bmw-key-programmer.html

 

Newest Yanhua Mini ACDP programming master

New Yanhua Mini ACDP programming master!!!

Radical change!

Subversion

Tesla car NO longer needs engines

YANHUA car keys programming NO longer need soldering iron

Car locksmith NO longer needs soldering work.

The first in the world

Programming no need soldering

 

BMW: CAS4/FEM/BDC/16ODOWT

Yanhua Mini ACDP programming master bmw cas4 fem bdc

Solder-free programming Data safety

WIFI connection Free connection

  1. Overturn the traditional work mode

Single operation is changed to team cooperation

  1. Change of operation mode

PC operation is changed to mobile phone operation

  1. Change of test connection mode

Electric soldering iron is changed to no-solder dedicated

connector

  1. Change from artificial observation to intelligent monitoring

Artificial observation / trying is changed to automatic

detection algorithm, grap hical in dication the relability

of connection. Ensure the data is not damayed and lost

  1. Change of service mode:

Offline service is changed to online synchronous service

 

IMMO/Mileage Programming

No need to remove chip

No need soldering

 

Functions

  1. Memory programming:

Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).

 

  1. BMW module programming:

(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.

(2)BMW engine ECU data reading and ISN code reading

 

  1. VW module programming.

MMC instrument

  1. Instrument mileage and airbag ECU reset/maintenance isunder development.
  2. BENZ. BMW Audi and various models are upgradedsuccessively

Yanhua Mini ACDP programming master function

 

ICP: Memory and MCU programming In Circuits

Yanhua Mini ACDP programming master icp

MCU programming in Circuits

Yanhua Mini ACDP programming master mcu

No need to cut the line

No need to lift the pin

 

Yanhua Mini ACDP programming master user manual + wiring diagram

 

Pre-order Yanhua Mini ACDP programming master

http://www.uobdii.com/wholesale/yanhua-mini-acdp-programming-master.html

E-Mail:Sales@UOBDII.com

Skype: uobd2net@live.com

(Solved)Yanhua BMW FEM BDC key programmer input program mode error

Yanhua BMW FEM/BDC key programmerinputprogrammodeerror” error shown as below. uobdii.com engineer find out the reason and offer the solution below.

yanhua-bmw-fem-bdc-key-programmer-inputprogrammodeerror-01

Reasons:

The above error is caused because of user’s incorrect operation, they didn’t follow the programmer’s tips and instructions.

uobdii.com engineer tried to test the FEM data the user provided by following the Yanhua BMW FEM/BDC programmer & BMW FEM Test Platform, and program key with success. They also tried to not follow the programmer’s instruction to read out the 95128 data, then they got the same error “inputprogrammodeerror”.

 

There are 2 tips to read out 95128/95256 data:

  1. After you are taken to step2: Update / Program FEM/BDC, you get the message “Please disconnect the vehicle battery, remove the FEM/BDC module, use Yanhua FEM key programmer read and save 95128/95256 EEPROM original data.”. Then please make sure you do as it says, just read out the 95128/95256 data andbackup it, for example, please name 95128/95256 data as ” EEPROM_95XXX.bin”.

yanhua-bmw-fem-bdc-key-programmer-inputprogrammodeerror-02

  1. After you are taken to this step shown as below, choose the “EEPROM_95XXX.bin” (the 95128/95256 datasaved in the previousstep). Note: if you selected the 95128/95256 data that you back up before, then you may get error message “inputprogrammodeerror” .

yanhua-bmw-fem-bdc-key-programmer-inputprogrammodeerror-03

Importance:

It’s very important to follow the tips and instructions of BMW FEM BDC key programmer and the BMW FEM Test Platform.

 

I think you are interested in:

Yanhua BMW FEM/BDC Key Programmer User manual

How to use YanHua BMW FEM Key Programmer (Video)

How to add BMW FEM BDC keys by YH BMW FEM key programmer? (Post & Pictures)

 

www.uobdii.com

NEW! Yanhua BMW FEM Key Programmer Coming (free for D3 users)

As you can see below, Yanhua BMW FEM Key Programmer can work on many BMW models with FEM till 2017 year:

It’s true that Yanhua BMW FEM Key Programmer will soon be available 10 days later.

yanhua-bmw-fem-key-programmer-1.1

Yanhua BMW FEM Key Programmer coverage:

1 Series             F20/F21                    2011-2017

2 Series             F22/F23/F45/F46            2014-2017

3 Series/GT          F34/F35                    2012-2017

4 Series             F30/F31/F32/F33/F36        2014-2017

X5                   F15                        2014-2017

X6                   F16                        2015-2017

As you can see below, Yanhua BMW FEM Key Programmer can work on many BMW models with FEM till 2017 year:

 

How to use Yanhua BMW FEM Key Programmer?

  1. allows offline operate with easy and stable.
  2. Need no tokens

so, don’t you think it is easy to operate.

 

Update: update on Yanhua official site http://www.autoemaster.com/

 

Where to get one Yanhua BMW FEM Key Programmer?

Not from Yanhua official site, but from the authorized dealer especially the one deal in Yanhua products for

many years e.g. www.uobdii.com. If you are preparing charging 500 tokens for Digimaster 3, this adapter is free of charge.