How to learn and cut Citroen key with Condor XC-mini

uobdii technician today copied/duplicate a Citroen key successfully, using Xhorse Condor XC-MINI key cutting machine. Here is the process of key data learning and key cutting.

uobdii technician today copied/duplicate a Citroen key successfully, using Xhorse Condor XC-MINI key cutting machine. Here is the process of key data learning and key cutting.

 

Step 1 – original key decoding

start Condor XC-MINI machine

Enter the Main interface, click on Key Duplication

Choose the Car Maker, click on Confirm

Choose Car Type, click on Confirm

Choose the Car type and Year of the production, then Confirm

Put the original Key in the properly position of the clamp display on the screen, then Click on Decode Key

Citroen-key-copy-with-Condor-XC-mini (1) Citroen-key-copy-with-Condor-XC-mini (2) Citroen-key-copy-with-Condor-XC-mini (3)

decoding the key…

Citroen-key-copy-with-Condor-XC-mini (4) Citroen-key-copy-with-Condor-XC-mini (5)

xc-mini display

Citroen-key-copy-with-Condor-XC-mini (6)

then take off the original key

 

Step 2 – new key cutting

Put the new blank key properly

Citroen-key-copy-with-Condor-XC-mini (7)

Verify bit code and modify bit code if needed, click on Cut to start

Citroen-key-copy-with-Condor-XC-mini (8) Citroen-key-copy-with-Condor-XC-mini (9)

then put the other side of the key to cut continue (click on Cut on the menu)

Citroen-key-copy-with-Condor-XC-mini (10) Citroen-key-copy-with-Condor-XC-mini (11)

use the brush to clean the key then take it off the machine

Citroen-key-copy-with-Condor-XC-mini (12)

Step 3 – key testing

Use the new cut key on the car

It’s verified to work well.

iKeycutter XC-MINI machine cut a key SUCCESS

Xhorse CONDOR XC-MINI Cut Citroen VA2T key in 3 steps

The most powerful automatic key cutting machine, Xhorse CONDOR XC-MINI, has been released in online shop—uobdii.com. Its operations are simpler than any other key cutting machine…

The most powerful automatic key cutting machine, Xhorse CONDOR XC-MINI, has been released in online shop—uobdii.com. Its operations are simpler than any other key cutting machine, and here is step by step guide on how to cut Citroen VA2T key.

 

Device you need:

 

Let’s go to the details procedures:

Step1: Select Key Type

Choose [Cut by Bitting] option

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-01

Select key [VA2T] and press continue

Note: if you can’t find VA2T, you can input V-A-2-T in the grid right side

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-02

 

Step2: Input Key Bitting

Input Key Bittings [F C F C E F]

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-03

Insert the blank key correctly on the Condor key machine

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-04

 

Step3: Cut key by itself

Click [Cut] to begin key cutting

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-05

CONDOR XC-MINI is in operation, wait for a while

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-06

 

Done! Cutting Citroen VA2T key successfully!

Xhorse-CONDOR-XC-MINI-Cut-Citroen-VA2T-07

How to use Condor XC-MINI to cut Hyundai Key? (Step Guide)

As a powerful key cutting machine, Condor XC-MINI can surely cut Hyundai key. Here is operation guide for you to use Condor XC-MINI master series automatic key cutting machine…

As a powerful key cutting machine, Condor XC-MINI can surely cut Hyundai key. Here is operation guide for you to use Condor XC-MINI master series automatic key cutting machine to cut Hyundai Key.

 

firstly you need:iKeycutter CONDOR XC-MINI and a new key blade

Step1. Start CONDOR XC-MINI, click “Key Database”, choose “Hyundai” and click “Confirm” button.

condor-xc-mini-cut-Hyundai-key-1

Step2. Input key code, XC-MINI will show you “Series”, “Cuts Note” and “Compatible Key”, click “Confirm” button.

condor-xc-mini-cut-Hyundai-key-2

condor-xc-mini-cut-Hyundai-key-3

Step3. Now you can see the “Align Line” picture, so you can make the new key blade in right position.

condor-xc-mini-cut-Hyundai-key-4 condor-xc-mini-cut-Hyundai-key-5 condor-xc-mini-cut-Hyundai-key-6

Step4. After that, tighten the key locking knob. Click “Cut” button to start key- cutting. Now you use XC-MINI to cut Hyundai key successfully.

condor-xc-mini-cut-Hyundai-key-7 condor-xc-mini-cut-Hyundai-key-8 condor-xc-mini-cut-Hyundai-key-9

How to use CONDOR XC-MINI do key duplication for Peugeot 206

Here is the instruction on how to use Xhorse Condor XC-MINI do key duplication for Peugeot 206.

Step 1: Turn on Xhorse Condor XC-MINI,and click “Key DUPLICATION”

key duplication 1

Step 2:Select car Maker press “P”, “E”, “U”… and Select “Peugeot”

Then Press “2” “0” “6” Select “206”.

Select “*(-01)” and press “enter”

key duplication 2 key duplication 3

key duplication 5

Step 3:  Put original key on Fixture of machine

Press “Save”==>Press “Key Decode”==>Press “Comfirm”

Please wait…until finish.

key duplication 4

key duplication 7

key duplication 9 key duplication 8

key duplication 9

Step 4: Put the key blank on the Fixture of Condor XC-MINI and===>  Press “Cut Key” .

key duplication 10 key duplication 11

cut key

Please wait…until machine finish cutting key

cutting key

Done! Good job!

Done

Save

How to use iKeycutter Condor XC-Mini “Key Duplication”?

Today,I will share my experience about iKeycutter Condor XC-Mini “Key Duplication” use tips.

Today,I will share my experience about iKeycutter Condor XC-Mini “Key Duplication” use tips.

User need to supply the Car type and Year of the production

Key Duplication 1

1) Enter the Main interface, Click on Key Duplication

Key Duplication 2

2) Choose the Car Maker Click on Confirm

Key Duplication 3

3)Choose Car Type, Click on Confirm

Key Duplication 4

4)Choose the Car type and Year of the production, Click on Confirm

Key Duplication 5

5)Put the original Key in the properly position of the clamp display on the screen, then

Click on Decode Key

Key Duplication 6

6)Verify bit code and modify bit code if needed, Click on Cut to start

iKeycutter Condor vs. Italian vs. Clone key cutting machine

Which key cutting machine is the best, the expensive one is good and the cheap one is not working? It is hard to tell, each tool has their pros and cons, which one is best, it depends on your…

Which key cutting machine is the best, the expensive one is good and the cheap one is not working? It is hard to tell, each tool has their pros and cons, which one is best, it depends on your needs and budget, in the following table, and I do comparative analysis on three cutting machines from several aspects.
Xhorse iKeycutter Condor XC-MINI/XC-007 VS. Italy cutting machine VS. Clone cutting machine
Comparison Points Condor key cutting Italy cutting machine Clone key machine
Machine structure Poured by total aluminum Poured by total aluminum Made of plate, easy to deform
Transmission Able to drive three-axle, apply ?TBI Ball Screws made in Taiwan Able to drive X- axle and Y-axle, apply Ball Screws Able to drive three- axle, the belt drive the parts to move.
Main axle motor great strength,
brushless motor
great strength Less strength, apply carbon brush motor
Fixture Available to replace fixture, with 2 set standard configuration: inner groove and outer ?groove, a set of Ford fixture for option Can replace fixture, 5 set of fixture Some ones is not able to change fixture, and neither can’t update, support more kinds of fixture.
Requirement to cutting tool Has no requirement to cutting tool With special cutting tool Most cutting tool can be used
Probe, milling cutter dual set With Probe, milling cutter dual set With Probe, milling cutter dual set Most are not dual set, it needs to replace when study and produce, it costs too much time
Key data base Available with key database, can update online Available with key database, can update online No available with key database, only with coding database of lock blank
After-sales service With special technical support, support remote assistance With Original Factory service If it is hardware problem, the user has to send back to the seller, if it is software problem, the seller can’t support solutions

How to make a Ford spare key with Condor XC-Mini

Xhorse iKeycutter Condor XC-MINI Master Series Automatic Key Cutting Machine cut Ford spare key procedure is provided below.
Steps on Ford key cutting with Condor Mini 
1.Start your condor xc-mini key cutting machine,Power-On Password: 123456
Condor-xc-mini-cut-ford-key-1
2.Find the proper key blade.
Condor-xc-mini-cut-ford-key-2
3.Insert the blank key.
Condor-xc-mini-cut-ford-key-3
4.Check the menu and find the right car model.
Condor-xc-mini-cut-ford-key-4
5.Then Condor will shows the detailed tooth wear.Next,click enter.
Condor-xc-mini-cut-ford-key-5
6.Key learning.
Condor-xc-mini-cut-ford-key-6
Condor-xc-mini-cut-ford-key-7
7.Insert new key blade,click the circle one to cut new blade.
Condor-xc-mini-cut-ford-key-8 Condor-xc-mini-cut-ford-key-9

How to operate Xhorse IKeycutter CONDOR XC-MINI Key Cutting Machine

Hi everyone, how are you today ? Here we’d like to share with you :

Xhorse IKeycutter CONDOR XC-MINI Key Cutter Operating instructions

ikeycutter-condor-xc-mini-11-300x300

Please Kindly Attention:
Please initial device before use

1 Height Level Adjustment

ikeycutter-condor-mini-1-300x174

1)Enter the Main interface, Click on the Self Test

ikeycutter-condor-mini-2-300x174

2)Click on Height Level Adjustment

ikeycutter-condor-mini-3-300x174

3)Follow the instructions on the screen, then click on the CONTINUE

ikeycutter-condor-mini-4-300x173

4)after the machine has stopped, follow the instructions on the screen till the tips of the
probe and the cutter are on the same horizontal level. Then click on CONTINUE. The
machine enters the Calibration Process

ikeycutter-condor-mini-5-300x171

5) After the machine has stopped, select the diameter of the current cutter in use, then
click on Confirm to finish

2 Clamp Calibration

ikeycutter-condor-mini-6-300x172

1)Enter the Main interface,Click on Self Test

ikeycutter-condor-mini-7-300x172

2)Enter Self Test interface, Click on Clamp Calibration

ikeycutter-condor-mini-8-300x173

3)Enter Clamp Calibration, Click on M1 button

ikeycutter-condor-mini-9-300x170

4)Follow the steps on the screen, then click on CONTINUE
5)Same methods to M2,M3 Clamp Calibration,do all steps fellow the screen

3 Cutting Calibration

ikeycutter-condor-mini-1-300x174

1)Enter the Main interface, Click on Self Test

ikeycutter-condor-mini-11-300x173

2)Enter Self Test interface, Click on Cutting Calibration

ikeycutter-condor-mini-12-300x172

3)Follow the steps on the screen, then click on CONTINUE, The Cutting Calibration in
Process

ikeycutter-condor-mini-13-300x169

4)Please use the brush to clean up the clamp cutting spot, the probe and the cutter. then
click on CONTINUE, Cutter Calibration Complete

IKeycutter CONDOR XC-MINI Master “Find Bitting” use tisp

Hello my friend, a new weekend coming, Uobd2.net Team today still share with one article for the IKeycutter CONDOR XC-MINI Master.

How to use “Find Bitting” With IKeycutter CONDOR XC-MINI Master

Parts of the car are missing bitting on door lock/trunk lock/ignition lock, enter unknown
bitting as “?”

mini-cutter-11-300x170

1)Enter the Main interface, Click on Find Bitting

mini-cutter-21-300x161

2) 1,Select Car Maker 2,Click on Confirm

mini-cutter-31-300x160

3) 1,Select the Blank Key 2,Click on Confirm

mini-cutter-41-300x162

4) 1,Select Key Type 2,Click on Confirm

mini-cutter-51-300x161

5)Enter known bitting
Enter unknown bitting as “?”
Click on Find Bitting Code

mini-cutter-6-300x168

6) Possible key bitting will be listed. Note that system has sorted the codes by the most
economical way in order to save blank keys. For example, the bitting under ” First key” only
needs three blank keys, the bitting under “Second Key” need another three blank keys, then the
“third Key”