Porsche Key Porgrammer | Key Cutting Machine

Yanhua Mini ACDP Program Keys for Porsche 1N35H BCM

Recently,Yanhua team launch new product—Yanhua Mini ACDP Porsche Module.It can suppot add new keys & all keys lost for Porsche vehicle.Here UOBD2 show the guide on how to use it to add new keys for Porsche 1N35H BCM.Hope our auto locksmiths can gain good deal of enlightenment from this operation.

Note:Yanhua Mini ACDP Porsche module support Porsche models from 2010-2018 new keys adding and all key lost!

Procedures:

Connect Yanhua Mini ACDP module to the Porsche BCM

Run Mini ACDP software,enter the main menu to select “Porsche”

Add key for New Porsche

ICP IMMO

MC9S12XEP100(Mask 1N35H)

Add key (auto mode)

Note:

1.Please prepare OBP+ICP adapter,BCM interface board,BCM module,BAV adapter and blank key.

2.It is forbidden to cut ACDP power off during the process of adding a key,otherwire adding the key will be error.

3.Please store the original and programmed EEPROM/DFLASH data as prompt.

Click “OK” to continue

Check the note massage below,and then click “OK” to continue

Checking pin,please wait…

It will show the pin detection status,if all of them have good connection,click ”Continue”

Configuring adapter,please wait…

It is detected that the BCM module chip has been encrypted,Do you want to continue?

Click “Continue”

Configuring adapter,please wait…

Reading PFLASH data,please wait…

Now you need to save the PFLASH data file,click “OK”

It will show you the PFLASH data file save path as below

Read EEPROM/DFLASH data,please wait…

Please save the original EEPROM data file,click “OK” to continue

It will show you the EEPROM data file save path as below

Please save the original DFLASH data file.

It will show you the EEPROM data file save path as below

Then Yanhua Mini ACDP Porsche software will show the IMMO information (please make sure that information is correct),click “Continue”

Check the note massage,and follow the operation to connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter.Then click “OK” to continue

Reading key information,please wait…

Current key ID:6BFF1423

You can now select a number for adding a key(the gray number is not optional,that mean this key number is already used or current key is already exit)

Programming key,please wait…

Please store the DFLASH data file after adding a new key.

It will show you the EEPROM data file save path

Check note massage below,and then click “OK” to continue

Checking pin,please wait…

Also it will detect the pin status,click “Continue”

Click “Continue”

Now it show the immo information as below,and you will see the key number 06

Then it Yanhua acdp mini will perform adapter configuring,chip decrypting,EEPROM/DFLASH data writing and chip data verifying,just wait…

Finally,it will prompt you adding key completed.

Install the BCM module back to vehicle,and test the key you just adding.

Done!

And here is the video guide:

How to Use Yanhua Mini ACDP Add Keys for New Porsche 1N35H

VVDI2 BMW V4.3.0 FEM BDC key learn & KM reset Test 100% works

Update! VVDI2 V4.3.0 is released with BMW new functions: BMW V4.3.0 adds BMW FEM/BDC

Update! VVDI2 V4.3.0 is released with BMW new functions: BMW V4.3.0 adds BMW FEM/BDC

key learn and FEM/BDC KM reset.

The user who have VVDI2 interface with BMW software could update SW and FW self directly, only connect your VVDI unit internet and press update FW and SW…

more option, VVDI2 V4.3.0 download free:

https://mega.nz/#!W1pSRRTL!0n8OX4wshaB1s0O06SDhTR0KvO32nPHZWg4CQjBMdrA

VVDI2 latest software version V4.3.0 update

************************************************ ********************

*** 2017-08-16

*** Require firmware V4.3.0

************************************************ ********************

===== VAG V4.3.0 =====

Bugfix

===== BMW V4.3.0 =====

Add BMW FEM/BDC system key learning, erase key
Add BMW FEM/BDC system reset KM
Add FEM/BDC syste backup coding, restore coding
Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!

===== Porsche V4.3.0 =====

Bugfix

===== PSA V4.3.0 =====

Bugfix

===== Transponder Programmer V4.3.0 =====

Bugfix

===== J2534 V4.3.0 =====

Bugfix

===== Online Upate Tool V4.3.0 =====

Bugfix

===== Quick Start V4.3.0 =====

Bugfix

VVDI2 V3.0.1 Software Download on Mega

Free download xhorse the best VVDI2 software v3.0.1 for basic diagnosis, ecu programming, key programming, etc.

Free download xhorse the best VVDI2 software v3.0.1 for basic diagnosis, ecu programming, key programming, etc.

VVDI2 v3.0.1 download link:

https://mega.nz/#!isI0xCiC!vmE7scRF5I-jF1m1wk_uhUOBjdwvTxt2c1gnqRWbJDg

Xhorse vvdi2 for sale:

VVDI2 full kit price: $2,189

Date: 2017-01-16

Update requirement: needs vvdi2 firmware V3.0.0
Update info:

VVDI2 VAG V3.0.1
1. Adapt unit: Fixbug for adapt Touareg/Phaeton/A8/Cayenne kessy module
2. Copy 48 transponder: Support query the last success result from server
3. Improvement for read MED17/EDC17 via OBDII
4. Improvement for read BCM2 via BDM programmer
5. Language bugfix in english system
6. Bugfix

VVDI2 BMW V3.0.0
1. For latest ISTAP CAS:9389115, 9389116, 9395656, 9395657, support add key via OBDII, require update CAS flash
2. Bugfix for information display in file make key when load 2K79X EEPROM dump
3. Language bugfix in english system
4. Bugfix

VVDI2 Porsche V3.0.0
1. Language bugfix in english system
2. Bugfix

VVDI2 PSA V3.0.0
1. Language bugfix in english system
2. Bugfix

Xhorse VVDI2 Transponder key Programmer V3.0.0
1. Language bugfix in english system
2. Improvement for copy transponder: support VVDI 46 transponder
3. Improvement for copy remote: Add remote type, support save/write remote copy data
4. Immobilizer data tool: Suzuki Alto 93C56 bugfix
5. Immobilizer data tool: Improvement for toyota G-Transponder
6. Bugfix

J2534 V3.0.0
1. Bugfix

vvdi 2 Online Upate Tool V3.0.0
1. Language bugfix in english system
2. Bugfix

vvdi 2 Quick Start V3.0.0
1. Bugfix

Program 2012 Mitsubishi Pajero key by OBDSTAR X300 PRO3 Key Master

This blog show you steps to program remote transponders for 2012 Mitsubishi Pajero Sport using OBDSTAR X300 PRO3 Key Master! Check below:

This blog show you steps to program remote transponders for 2012 Mitsubishi Pajero Sport using OBDSTAR X300 PRO3 Key Master! Check below:

(Generate two new transponder keys by KD900 remote maker in advance)

Step1. Choose “Immobilizer”→ “Mitsubishi”→ “Mitsubishi V30.16” → “China” → “Select from type”.

Choose “L200 Triton” → “2011-” → “Type 1”.

Step2. Choose “Program keys” function.

Use first new key to turn on ignition then confirm.

OBDSTAR Key Master programs the first key successfully!

Step3. Press the ENT button to continue program next one. Insert second key and turn ignition on, press the ENT button.

OBDSTAR Key Master programs the second key successfully! Press the ESC button to stop key programming.

Key programming complete!

Step4. Back to choose “Add remote”.

It reminds you this action will erase all remotes. Press ENT button.

Now ordermy press the two remote key’s Unlock button for 3 times in 30 seconds.

The whole procedure complete! Two new Mitsubishi Pajero transponders are programmed successfully by OBDSTAR X300 PRO3 and KD900 programmer!

OBDSTAR X300 Pro3 Programs SUZUKI Swift 2013 IMMO key

OBDSTAR X300 Pro3 Key master performs many useful functions including key programming + Odometer Adjustment +EEPROM/PIC+OBDII diagnosis.

OBDSTAR X300 Pro3 Key master performs many useful functions including key programming + Odometer Adjustment +EEPROM/PIC+OBDII diagnosis. Here is a tutorial on programming immo keys for SUZUKI Swift 2013 with key master.

SUZUKI Swifi 2013 and Key

Detailed procedure:

Enter IMMOBILISER function menu, choose vehicle model “SUZUKI”

Enter “SUZUKI V30.06”

Then choose “Smart key system”

Choose “Alivio”

“Program smart key”

Choose “Without Pin” option, with this option, You do not need to pay to get the Pincode from workshops.

X300 Pro3 will remind you after performing this function, all keys will be erased. We have only one key, so just press ENTER button to continue.

It is configuring the system, wait…

And You will find the security blink for waitting new key

Then you should input the current year and month, press ENTER

X300 Pro3 key master will prompt you stick the new key to the start button

Do it like this and press ENTER button.

You will hear 2 beeps to registered key, Security light go off

Program SUZUKI Swift key successfully with X300 PRO3! Press ESC to exit the system.

Test remote key

Done! Enjoy your new key!

How OBDSTAR X300 DP do All Key Lost for Toyota with G via OBDII

How to do all key lost for Toyota with G? We can only program with adapter before, but now we can directly program with OBDSTAR X300 DP via OBDII port, Here i will share with you the detailed procedure.

How to do all key lost for Toyota with G? We can only program with adapter before, but now we can directly program with OBDSTAR X300 DP via OBDII port, Here i will share with you the detailed procedure.

Device: X300 DP tablet key programmer full version

Master key and sub (G) key

G chip key

Connect X300DP with your vehicel through OBDII Port

Click “Diag Program” on the main menu

Choose “Type 2(with G72)”

Choose “Remote immobilizer(All key lost)”

Then switch ignitino off

Click OK to continue

Switch ignition on

Click OK to continue

X300 DP will prompt you to switch ignition off and remove the key

After doing that, click OK

It is configuring the system, wait for a while…

Then insert the removed key and switch ignition on

It is configuring the system, wait…

Switch ignition off and remove the key again

Then you should program keys as the following steps within 120 seconds

Here we program 1 master key and 1sub key.

Click OK to begin program keys

Step1: Insert the first master key, turn on the ignition and wait for 5 seconds…

Step2: insert the second sub key (the G chip key), turn on the ignition switch and wait for 5 seconds

Step3: turn on the ignition switch quickly for 5 times, the security light will turn off, the programming is finished.

Done! Program key for 2013 toyota RAV4 with G successfully!

OBDSTAR X300 PRO3 add key for Mitsubishi EVO 10 lost all smart keys

Here is a guide for you to program new working keys for Mitsubishi EVO 10 lost all smart keys by OBDSTAR X300 PRO3. Let’s check below steps to start!

Car model: Mitsubishi Lancer Evolution 10

Car problem: lost all smart keys (the valet key is still available)

This guide’s target: to program 2 new remote keys

Tool needed: OBDSTAR X300 PRO3 Key Master

Step1. Choose “Immobilizer”→ “Mitsubishi”→ “Mitsubishi V30.16”

Smart remote twist start: twist and remove the ignition switch knob as below:

Step2. Install the valet key in a new remote. Use the new key to turn ignition on.

Choose “China” → “Select from type”

Choose “Type 2 (CAN with smart)”

Step3. Pull out the mechanical key form smart key and put it back again. Switch ignition on then press Enter button to continue.

Choose “All smart keys lost”

Enter the security code 8A02and confirm

Step4. Program the first remote key success! Insert the second key to turn ignition on then press the Enter button to program.

Press all smart keys car lock button 2 times in one minute. You will hear car horn. Program complete!

That’s all steps about OBDSTAR Key Master program new keys for Mitsubishi EVO 10 lost all smart keys. Hope it helps!

Make a working BMW key by VVDI2 Commander Key Programmer OK

Hi there! I newly tested it OK to use VVDI2 Commander to make a working BMW key. So share my experience here and hope it helps!

Hi there! I newly tested it OK to use VVDI2 Commander to make a working BMW key. So share my experience here and hope it helps!

Tool I used:

It is VVDI2 Commander Key Programmer for VW/Audi/BMW/Porsche Full Version. Because I need to deal with VW car issues I bought this VVDI2 full at uobdii.com, $2189 not including the delivery fee off course. But if you need a lower price and just focus on BMW, I know there is another option: VVDI2 with Basic, BMW and OBD Functions

Below I will talk about is the procedure VVDI2 make BMW key:

First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.