Make a working BMW key by VVDI2 Commander Key Programmer OK

Hi there! I newly tested it OK to use VVDI2 Commander to make a working BMW key. So share my experience here and hope it helps!

Tool I used:

It is VVDI2 Commander Key Programmer for VW/Audi/BMW/Porsche Full Version. Because I need to deal with VW car issues I bought this VVDI2 full at uobdii.com, $2189 not including the delivery fee off course. But if you need a lower price and just focus on BMW, I know there is another option: VVDI2 with Basic, BMW and OBD Functions

 

Below I will talk about is the procedure VVDI2 make BMW key:

First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.

vvdi2-commander-make-bmw-remote-key-1

Click Key Learn

vvdi2-commander-make-bmw-remote-key-2

Click Get Key Info and I see two options: one add key, one lost all key. I choose Add Key then NEXT.

vvdi2-commander-make-bmw-remote-key-3

And it says the dealer key should be taken away. So pull out the old key and I click OK.

vvdi2-commander-make-bmw-remote-key-4

  1. It read out all key information. I click Save Key Info below to save the original key data.

vvdi2-commander-make-bmw-remote-key-5

Next I choose KeyID3 and click Prepare dealer key with programmer.

vvdi2-commander-make-bmw-remote-key-6

It asks me to put new key into programmer. So I put the new key into VVDI2 coil.

vvdi2-commander-make-bmw-remote-key-7

Then it asks if the key has keyless, I say no.

  1. New key is made but locked. So as the tips I use the key to start car.

vvdi2-commander-make-bmw-remote-key-8

Yes. Car starts successfully as I expected!

Sales keycuttingmachine.org