Toyota G chip add key –a great number of locksmith are looking for the working programmer, according to my own experience and others feedback, there are top 5 programmers are worth to recommend, they are OBDSTAR X100 Pro, OBDSTAR X300 PRO3, JMD Handy Baby clone machine, Toyota G and Toyota H Chip Key Programmer, Lonsdor K518,Smart Key Maker for Toyota G Chip and Lexus.
Option 1: OBDSTAR X100 pro / X300 pro3 add key on Toyota G chip
OBDSTAR X100pro and X300 pro3 is verified to add key on Toyota G chip, firstly connect it to the EEPROM PIC 2-in-1 adapter, secondly take apart the immobilizer box and initialize data to add key. Take 93C66 for example, find out the exact chip e.g 93C66 to connect with X100 pro, click option 93C66then put back the chip and go on add key.
For the detailed OBDSTAR X100pro and X300 pro3 covers Toyota G chip models, click obdstar official site, click ‘Testable’, find out X-100 Pro – EEPROM ADATPER – press Ctrl + F enter Toyota.
VIOS immobilizer(with G)
Key chip 4D60(93C66)
RAV4 immobilizer (with G)
Tundra immobilizer (with G)
Other immobilizer (with G)
Option 2: JMD Handy Baby clone machine Toyota G chip add key
After you receive JMD Handy Baby clone machine, if you want the G chip add key working, browse this link pay the g chip authorization fee, take this for example, it only costs $80
then mail the machine serial number for authorization file, then get the file to update.
It works perfectly fine. I had not used it until now to do immo but remote programming works as advertised. Very simple. Tested on Toyota Highlander and Toyota Rav4 until now.Separate key and remote on these cars that I tested.
Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry
Toyota Add Remote Control
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring end, It’s OK.
Note: Switch is on the right (add remote control).
Toyota Add Transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)
There is no need to install the driver and software for the key programmer, it is Secure, stable, fast, if you lost all the Toyota key with G chip, Lexus Smart Key Programmer SO163, can add 1-3 keys.
Please use the normal key programmer read the data of 93C66/93C46/93C86, save the data and do the process next.
Take of the ECU Anti-theft module, and install the 93C66 eeprom IC to the Toyota right size adapter, then connect the USB with the computer, turn the function switch to Toyota G chip, then you can note the Indicator start shinny, then the process is success. Put the 93C66 back to ECU Anti-theft module, and after installed the Anti-theft module on the car, put in the first key, then take out the key once the Indicator off, and then out in the second key, do as the last process, after the Indicator off,, you can power on your car. You don’t need Synchronous operation.
Note: One time just can match one IC, not depend on the turn, key don’t far away from the Sensing area.
Toyota Lexus Smart Key Programmer SO163
Take off the ECU IMMO model,. Then install the 93C46 eeprom IC on the Toyota key programmer right related adapter, then connect the USB with the computer, turn the function switch to Lexus Key, then you can note the Indicator start shinny, Induction into the circle of the key, touch the switch now by clicking under the relative position of the moment began to flash lights, light goes out after a few seconds, initialization is successful. Replace the eeprom IC EUC security module, replace the vehicle anti-theft module.
The ECU BOX module removed, the 93C86 eeprom IC programmer installed on Toyota models corresponding to transposons, connect the USB cable to the computer, and then switch to Lexus Key features bit, you can see the relative position of the 93C86 LEDs flash slowly into the state, put the key into the induction circle, now click touch switch relative position under the lights began to flash at the moment, a few seconds after the light is off, the initialization is successful.
Replace the eeprom IC EUC security module, replace the vehicle anti-theft module.
Indicate: Z type machine simply clean with alcohol IC pin into the transposon after, H-type
machine choose the corresponding IC solder pads.