Xhorse Dolphin XP-005 Error Code1/6/56 Solution

This post is guide to solve When user use the Xhorse Dolphin XP-005 automatic key cutting machine and shows error as the followging.

1. Error 01


Click ‘Fix internal error’ in the repair menu of Xhorse Update Kit software

Update firmware again

2. Error code 6& Error 56


Check the steps as the prompts. (height level adjustment, clamp calibration etc.)
Do the electrical conductivity measurement.
If the cutter and the probe don’t conduct, disassemble the machine and test abnormal conductivity of the cutter/probe.

Sales keycuttingmachine.org