Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda

In this article,www.keycuttingmachine.org show you guide on how to use Handy Baby 2 and JMD Key Baby cutting machine add new key for Mazda.

 

Step 1:Cutting A New Key

Put the original key on the JMD Key baby clamp

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (1)

Select “Mazda”

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (2)

Select “MAZ24-027”

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (3)

Select “Decode”

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (4)

Now JMD key cutting machine will start decode original key

Wait for proceed…

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (5)

Remove original key from clamp

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (6)

Put a new blank key on the clamp

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (7)

Now press “Cut” button–>”Enter” button on the screen

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (8) Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (9)

 

JMD Key Baby Key Cutting Machine starting cutting proceed

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (10) Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (11)

 

Cutting completed

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (12)

 

Step 2:Programming/Copy Key

Now you need to do programming

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (13)

Use Handy Baby 2 programmer to read original key data

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (14)

Decode

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (15)

Calculating

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (16)

Now you can use K-Chip or S-Chip to generate

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (17)

Put JMD remote into Handy baby II coil,then press OK to copy

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (18) Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (19)

 

Sucess

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (20)

Test new key on Mazda

Handy Baby 2 & JMD Key Baby Machine Add New Keys for Mazda (21)

Done!

Possible to use Handy Baby for OBD add MQB keys How to

This article keycuttingmachine.org show you the procedures on how to use Handy Baby 2 and JMD OBD adapter to program MQB keys.

 

Part 1: JMD Handy Baby II MQB vehicle list

Type Year Mode Odometer Dashboard type All key lost
VW Polo 2019- online No JCI MQB No
VW Lavida 2018- online No JCI MQB No
VW T-Cross 2019- online No JCI MQB No
VW Tharu 2019- online No JCI MQB No
VW Teramont X 2019- online No JCI MQB No
VW Bora 2019- online No JCI MQB No
VW Sagitar 2019- online No JCI MQB No
VW Magotan 2017- online No JCI MQB No
VW CC 2019- online No JCI MQB No
VW T-ROC 2018- online No JCI MQB No
VW Tayron 2019- online No JCI MQB No
Skoda Octavia 2018- online No JCI MQB No
Audi A3/S3/RS3 2013- offline Yes VDO MQB No
Audi Q2 2014.6- offline Yes VDO MQB No
VW Golf7/

Sportsvan

2014.6 offline Yes VDO MQB No
VW TiguanL 2017- offline Yes VDO MQB No
VW Lavida 2015- offline Yes VDO MQB No
VW Passat 2017- offline Yes VDO MQB No
VW Teramont 2017- offline Yes VDO MQB No
VW TouranL 2016- offline Yes VDO MQB No
Skoda Octavia 2015- offline Yes VDO MQB No
Skoda Superb 2016- offline Yes VDO MQB No
Skoda Karoq 2018- offline Yes VDO MQB No
Skoda Kodiak 2017- offline Yes VDO MQB No

Source:http://www.uobdii.com/wholesale/jmd-obd-adapter-for-handy-baby-2.html

 

Note:

MQB function requires JMD OBD adapter. The adapter only works with Handy baby II.

Handy baby ii cannot do MQB all keys lost.

Handy baby 2 OBD does not support JCI dashboard offline programming, always do it online. Online need extra token.  Offline programming does not require token.

After you get the OBD,send us your OBD ID to open the MQB function.

 

Part 2: How to use Handy Baby II for OBD adding MQB keys

 

Steps: read & save immo data – generate a new key

in detail…

The car status:

handy-baby-2-obd-add-mqb-keys-1

JMD OBD adapter for OBD connection

handy-baby-2-obd-add-mqb-keys-2 handy-baby-2-obd-add-mqb-keys-3

 

Go to the JMD application – OBD – MQB

handy-baby-2-obd-add-mqb-keys-4 handy-baby-2-obd-add-mqb-keys-5 handy-baby-2-obd-add-mqb-keys-6

Read and save anti-theft data

handy-baby-2-obd-add-mqb-keys-7 handy-baby-2-obd-add-mqb-keys-8 handy-baby-2-obd-add-mqb-keys-9 handy-baby-2-obd-add-mqb-keys-10 handy-baby-2-obd-add-mqb-keys-11

Generate key: this function need to connect the Handy baby 2. pls connect the handybaby ii with the OTC cable or Bluetooth after connection OBD Bluetooth

handy-baby-2-obd-add-mqb-keys-12 handy-baby-2-obd-add-mqb-keys-13 handy-baby-2-obd-add-mqb-keys-14 handy-baby-2-obd-add-mqb-keys-15 handy-baby-2-obd-add-mqb-keys-16 handy-baby-2-obd-add-mqb-keys-17 handy-baby-2-obd-add-mqb-keys-18 handy-baby-2-obd-add-mqb-keys-19 handy-baby-2-obd-add-mqb-keys-20

Send data successfully

Starts to generate a key with handy baby ii

handy-baby-2-obd-add-mqb-keys-21 handy-baby-2-obd-add-mqb-keys-22 handy-baby-2-obd-add-mqb-keys-23 handy-baby-2-obd-add-mqb-keys-24 handy-baby-2-obd-add-mqb-keys-25 handy-baby-2-obd-add-mqb-keys-26 handy-baby-2-obd-add-mqb-keys-27

Learn key

handy-baby-2-obd-add-mqb-keys-28 handy-baby-2-obd-add-mqb-keys-29 handy-baby-2-obd-add-mqb-keys-30 handy-baby-2-obd-add-mqb-keys-32 handy-baby-2-obd-add-mqb-keys-33 handy-baby-2-obd-add-mqb-keys-34 handy-baby-2-obd-add-mqb-keys-35 handy-baby-2-obd-add-mqb-keys-36

All success!

VW/Skoda 4th Immo All Key Lost Programming by Handy Baby 2

This article show you how to use JMD Handy Baby 2 to perform VW/Skoda 4th Immobilizer system all keys lost programming.Hope it is helpful to your work.

 

What You Need?

JMD Handy Baby 2

Handy Baby Assistant Adapter

JMD48 Chip

 

Related Content:

How to use Handy Baby II to copy Toyota /Lexus G key?

How to Register and Active Handy Baby 2 II

 

Article About VW 4th Immobilizer System Key Programming:

Lonsdor K518ISE and VAG OBD helper program VAG 4th via OBD

VAG OBD Helper & VVDI2 program VW 4th IMMO All Keys Lost via OBD

OBDSTAR X300 DP+ RFID Adapter program key VW 4th 5th IMMO OK

How to program vag 4th 5th IMMO by Xtool X100 PAD 2 full set?

 

Procedures:

Step 1:Collect Data

Insert new remote key (without chip) into ignition and lighten the dashboard

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (1)

Plug the Handy Baby assistant adapter on OBDII port.

When the assistant make a long beep for 2 seconds and stops for 1 second,the data is collected ,then pull out the assistant adapter.

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (2)

 

Step 2:Upload Data

Open the JMD APP and connect handy baby 2

JMD assistant sensing area sits on the identification antenna and reads the collected data.

After read successful,choose JMD APP upload

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (3)

Write VIN code

Choose VW or Skoda

Write token to payment (Purchase from a agent)

Upload success

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (4)

 

Step 3:Download Data and Program New Keys

Connect Handy Baby 2 to laptop and build connection between Handy Baby 2 and JMD Handy Baby Client

After connection built,select “ALL LOST CALC”

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (5)

The device has been connected to star collecting data…

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (6)

After the calculation is successful,the check code will be sent to the registered mailbox

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (7)

Download success!

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (8)

Now download the data to your handy baby 2,select “Download Data”–>”Download PC”

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (9)

Place “C-JMD 48 chip” into the coil,then click “OK” to copy new key

After first key program successfully,you can press “OK” to copy next key.

JMD Handy Baby 2 All Key Lost Programming for VWSkoda 4th Immobilizer (10)

Done!

How to Use JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key

Here UOBDII share the guide on how to use JMD Handy Baby 2 to decode and add new keys for BMW 525 ID46 Keys.

 

 

What You Need?

Handy Baby II 2 Programmer

S-JMD Red Chip or K-JMD Chip

 

Procedures:

Build connection between Handy Baby 2 and you mobile JMD APP

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (1)

Insert the original key into the coil to read key information

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (2)

Choose “Handy Baby 1”

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (3)

The collect antenna of the Handy Baby II is close to

Close Handy Baby II collection antenna to BMW 525 car slot (ignition switch)

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (4)

Insert the original car key into the card slot,lit up dashboard and wait connection complete.

Select “On-line(APP)”

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (4)

Calculating…Don’t move the key

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (6)

Decode successful.Used JMD S-Chip/K-Chip/ID46 to copy.

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (7)

Copy successfully,and if you want to copy next key click “OK” to continue.

JMD Handy Baby 2 to Decode & Adding New BMW 525 ID46 Key (8)

Done!

Handy Baby 2 Registration & Activation Guide

After you get the new generation Handy Baby 2,you need to active the device.So here UOBD2 share the guide on how to register and active Handy Baby 2.

 

Preparation:

JMD Handy Baby II 2

JMD Handy Baby Client (Download here)

 

 

Procedures:

Install JMD Handy Baby client on you laptop,and connect Handy Baby II to laptop,then the client software will identify your handy baby 2 device automatically.

And then click “Activation”

How to Register and Active Handy Baby 2 II (1)

Then click “Registration”

How to Register and Active Handy Baby 2 II (2)

Input the account information,then click “Submit” button to continue

How to Register and Active Handy Baby 2 II (2)

And then it will show you below massage:

How to Register and Active Handy Baby 2 II (4)

Input the account information

How to Register and Active Handy Baby 2 II (5)

Click “Next” to continue

How to Register and Active Handy Baby 2 II (6)

And if you select “I have the Handy Baby I”,you will need to connect your Handy Baby I to computer,and keep the handy baby I in the hone page.

How to Register and Active Handy Baby 2 II (6)

And the client software will identify your handy baby i information,and after finish it will prompt you to connect the Handy-Baby II to the computer,and keep the Handy-Baby in the home page.

And wait for Handy Baby II activation process finish.

Congratulations,activation has been completed!

How to Register and Active Handy Baby 2 II (8)