This instruction show you guide on how to use JMD Key Baby to cut Toyota key by key code function.When the key code is available,it is the best choice to use this method to cut key.
Get the lock key code or from other ways:
Power on JMD Key Baby machine,and enter menu to select “Key Code”
Input “T” and select “TOYOTA”
Now input the key code “47794” and press “Enter”
Now JMD key cutting machine show you the key and the position you need put a blank key on the clamp 2.
Now put a Toyota blank key on the clamp 2
Press the “Enter” button
It will start cutting work,just wait for proceed…
After completing,remove it from clamp
Test on the lock or door lock
JMD Key Cutting Machine:
After you get the new generation Handy Baby 2,you need to active the device.So here UOBD2 share the guide on how to register and active Handy Baby 2.
JMD Handy Baby II 2
JMD Handy Baby Client (Download here)
Install JMD Handy Baby client on you laptop,and connect Handy Baby II to laptop,then the client software will identify your handy baby 2 device automatically.
And then click “Activation”
Then click “Registration”
Input the account information,then click “Submit” button to continue
And then it will show you below massage:
Input the account information
Click “Next” to continue
And if you select “I have the Handy Baby I”,you will need to connect your Handy Baby I to computer,and keep the handy baby I in the hone page.
And the client software will identify your handy baby i information,and after finish it will prompt you to connect the Handy-Baby II to the computer,and keep the Handy-Baby in the home page.
And wait for Handy Baby II activation process finish.
Congratulations,activation has been completed!
JMD handy baby can copy 8C successfully using TK5561A blank chip.
Testing pictures means a lot.
As you can see, the upper one chip is 8C and the one below is TK5561A blank chip.
Firstly, put the 8C chip in the coil of JMD handy baby and meanwhile press the “Ok” button.
Read out the type 8C and ID.
Take out the 8C chip and press the “Ok” button, get message “Put in blank TK5561A”.
Put in the blank TK5561A, you can see it copy successfully.
Here I thumb up JMD handy baby for what it can do.