Key Cutting Machine Blog , Tech and Support for Car Key Cutter: all kinds of key copy machines review,key duplicating machine software setup,update,method of application and FAQ
In this post keycuttingmachine.org will show you guide on how to use CG Godzilla machine to cut key for Honda HON66.
Procedures:
Put the working HON66 key on clamp
Select “Learning”,CG Godzilla will start decode
Key learning successfully
Now remove original key,and put the a blank key on clamp
Then press “Cutting”,and click “Continue”
Now wait for cutting
After one side cutting finishing,please change the other side to cut
Both side cutting completely,clean clamp and key
Here keycuttingmachine.org show you guide on how to use Alpha key cutting machine to cut key for Honda Accord.
Procedures:
3 Ways to enter Honda Accord Key Data
1.Manufacturer,Model,Year
2.Key Blank Number
3.ID Number
1.Manufacturer,Model,Year
Click “Automobile” button and select “Honda”–>”Accord”–>”2010-0″–>”K001-M999,N001-N7″ to enter key data.
2.Search by Key Blank Number
Click “Search” button,input “HON66″–>”13416-{6-6}”
3.Search by ID Number
Fix a new key blank on the tip level of Side B
Click “Cut” button to start cutting (Close the shield)
Start cutting
Repeat work for the other side,after cutting done.
Open the shield to get the new key (clean shavings)
http://www.uobdii.com/wholesale/alpha-automatic-key-cutting-machine.html
This instruction show you guide on how to use 2M2 Tank machine to cut key for HON66 all key lost.
Procedures:
Run 2M2 Tank APP,then click to edit a key
Input HON66
Select “HON66.N66”
Click “CUT”
Input tooth code:
Then press “CUT”
Please set the key embryo in the left side
Let the front end of the key close to the first slot and does not exceed it.
The key remains level on the bottom and clamp it.
After then,please press “CONFIRM”
Then 2M2 key cutting machine will start cutting work
After one side cutting work finishing,put the other side and repeat work
Press “CONFIRM”
And after both side cutting work complete,test it on lock.
