How to Use 2M2 Magic Tank Machine Cut HU64 Key

In this instruction,i will show you guide on how to use 2M2 machine to cut new blank key for HU64 lock.

Run Tank app on mobile phone,and then click to edit a key

Input “HU64”

Select “HU64-2.M10”

Press “DECODE”

Then follow the prompt info to operate:

Insert the original key to HU64 clamp,and the tighten the screws.

Set the HU64 clamp to the bottom of the clamp in the right side and clamp it.

Attention,the HU64 clamp must be against this side

After then ,press “CONFIRM”

Decoding

Please remove the key,if the key has been removed,click the “OK” button

Insert the blank key to the 2M2 machine HU64 clamp,and tighten the screws

Set the HU64 clamp to the bottom of the clamp in the right side and clamp it.

Attention,the HU64 clamp must be against this side

After then press “CONFIRM”

2M2 Key Cutting machine will start working

After one side cutting work finishing,repeat operation for the other side cutting

Clear the clamp and remove the key to test on the lock