Xhorse Condor XC-MINI V4.0.1 (06.16) update and procedure

Here provide Xhorse Condor XC-MINI V4.0.1 features, update link and procedure.


Xhorse Condor XC-MINI V4.0.1 (2017.06.16) features:


+Add universal key decode function

+Add M2-D function

+Add motor sensor testing function

*Modify probe/cutter detection

*Fix machine may crash error problem

*Fix HU49 key decode error

*Fix HU66 cutting speed issue

*Fix BW6 cutting error

*Fix TBE1 cutting error


1.New update for both SN KM02/KM03 machines

2.New function: Main Interface-Key Duplication-Universal Type

3.Universal Type support decode/cutting parts of home & vehicle keys

4.Please keep the whole key clean and conductivity good(ensure without dust/oil)

5.For one side key(thickness of whole key usually 1.5mm or 2.00mm) please add a shimsiness card under the key, ensure the whole key thickness should more than 3mm


Condor XC-MINI V4.0.1 update download:


(No pass, safe, working)


Condor XC-MINI V4.0.1 update procedure:

  1. Connect Xhorse Condor XC-MINI host to the PC with a USB cable.
  2. Turn on Condor XC-MINI.
  3. Click “Update online” button to start update.
  4. The screen will appear “Updating” Prompt.
  5. Wait for the update completed.


Do not turn off PC or unplug USB cable during updating.

Data downloaing and firmware upgrading may take a while, please be patient.

If the update fails,turn off anti-virus software and then try again.


Sales keycuttingmachine.org