How to Tell if Your FNR Key Prog 4 in 1 is HQ?

Here introduce the method to identify if your FNR Key Prog is a high quality,hope this article is helpful to you!


Ford Key Prog: 1.1.2 – program keys to Ford 1997-2011
Renault Key Prog: 2.3.1 – program new keys and read pin codes
Nissan Key Prog: 2.3.1 – program new keys and read pin codes
Ford Incode Calculator: 1.0 – Ford incode calculator for 6 or 12 characters


FNR Key Prog 4-in-1software download:


Here is a example,it show the FNR Key Prog PCB below:

FNR-Key-Prog-4-in-1-pcb-sk127-1 FNR-Key-Prog-4-in-1-pcb-sk127-2 FNR-Key-Prog-4-in-1-pcb-sk127-3

Good to know: How to know if the pcb is goor or not?

PCBs (Printed Circuit Boards) are the most used and basic assembly unit applied by all types of electronic devices. All functions and performance of devices are implemented mainly by PCBs. Put simply, PCBs are the heart of electronic devices and both their quality and reliability is directly correlated with quality and reliability of electronic equipment. Nowadays, intelligence and miniature of electronic devices leads to increasingly smaller size and complicated structures of PCBs.


In terms of PCB performance, it can be testified that even if schematic is correctly designed, subsequent assembly and debugging will still be influenced if PCB design and manufacturing receive low-qualified processing while undemanding quality inspection is carried out on PCBs. Therefore, it’s especially important to implement quality control in the process from PCB design to PCB manufacturing.

The task in quality control of PCBs comes primarily in effective administration, monitoring and measurement on PCB design, PCB manufacturing and PCB inspection.

Quality Control in PCB Design

In order to ensure quality in PCB design, your task should cover the following three aspects.

  • Validity of PCB design file has to be ensured.

Project leader should be responsible for checking PCB design file and corresponding approval procedures have to be implemented so that validity of PCB design files has to be ensured.

  • Manufacturability of PCBs has to be ensured.

Project leader and technologist should strictly conform to technological requirement in order to ensure manufacturability of PCBs. Technological requirement can be directly listed on design drawings if it is relatively simple. Otherwise, it has to be summarized into a text that is saved in additional file. No matter what is the simplicity of technological requirement, it has to be explained ACCURATELY, CLEARLY and REASONABLY. Technological requirement after checking should not only meet the present production craft level with high cost effectiveness but also leave much convenience to implementation of subsequent assembly, debugging and checking.

As a value-added option for our Assembly services, PCBCart offers Free DFM Check. If any issues were detected, our engineers would get in touch with you immediately to solve the issue as quickly as possible with you prior to scheduling PCB manufacturing accordingly.

  • Testability and Normalization has to be ensured.

Standardiser implements normalization checking in terms of test points, structural style, dimensions, routing, through-hole via and characters so as to ensure testability and manufacturability of PCBs which should conform to requirement of national and industrial standardization.


Quality Control in PCB Manufacturing


In order to ensure quality in PCB design, your task should cover the following three aspects.

  • Capability of PCB manufacturers has to be ensured.

Quality department, together with sourcing department should investigate and approve aptitudes and manufacturing capability of PCB manufacturers in order to ensure their sufficient manufacturing capability on your design project.

PCBCart features extended custom PCB manufacturing capabilities for a comprehensive range of PCBs including Aluminum PCB, HDI PCB, High-Tg PCB, Halogen-free PCB, Flex PCB, Flex-rigid PCB, etc. and PCB Assembly services.

  • Checking and confirmation have to be constantly done prior to manufacturing.

PCB designers have to check and confirm the design drawings that will be applied by PCB manufacturer for many times prior to manufacturing. Since PCB design can’t be successful just after one trial and modifications have to be made time and time again, PCB manufacturers will hold multiple versions of design drawings. So it’s necessary to carefully check and confirm the final design drawing provided by PCB manufacturer prior to practical manufacturing so that manufactured PCBs conform to requirement of the last version.


  • Much attention should be paid to the key procedures of PCB manufacturing.

The quality of key procedures of PCB manufacturing influences a lot on performance and reliability of PCBs and quality control on that has to be strengthened. The key technological procedures formulated by PCB manufacturer have to be monitored and checked including etching, via mentalization etc. so as to ensure absence of burr, gap, bridge defect and void. Furthermore, quality control has to be overtaken on stacking of multi-layer PCBs in order to ensure the thickness, adhesive intensity and positional accuracy. Since gold plating is usually required by high-frequency PCBs and micro-strip boards, specific gold plating operation instructions have to be made in order to ensure the thickness and purity of plating plane.

Quality Control in PCB Inspection

Quality control in PCB inspection refers to monitoring and measurement of PCBs in strict accordance with inspection through visual inspection or the application of professional equipment. The inspection result has to be stored. If special requirement needs obtaining, specific acceptance rules have to be made additionally. Specific PCB inspection items will be introduced in subsequent articles.


French Car Key Programmer Cheaper and Simpler for Beginners


If you are a new beginner who wants to find some cheaper and simpler French car key programmer. Here are some notes for you.

Cars: Citroen, Peugeot and Renault. I have Berlingo, and at work, I drive Megane II.


Point of views:

  1. Fnr4-1 is a good starter tool.

-> Read Fnr4-1 program Renault Megane Laguna key card

-> Setup Fnr4-1

Zedbull, with effi.

And a upa prog, so you can read some bsi, and clusters.


2.Lonsdor K518ISE can program key on Renault, Peugeot, Citroen, Alfa Romeo

Series Origin Year Fuel Type Function
2930 Immobiliser System 159 Other Key Programming
2931 Immobiliser System Spider Other Key Programming
2932 Immobiliser System Brera Other Key Programming
2933 Immobiliser System 147 Other Key Programming
2934 Immobiliser System GT Other Key Programming
2935 Immobiliser System Giulietta Other Key Programming
2936 Immobiliser System Mito Other Key Programming

Series Origin Year Fuel Type Function
308 Other Other Other Key Programming
3008 Other Other Other Key Programming
307 Other 06- Other Key Programming
308S Other Other Other Key Programming
Read PIN Code Other Other Other Read PIN Code
Classified by System Smart Key Other Other Smart Key System
Classified by System Ordinary Key Other Other Key System
207 Other Other Other Key Programming
307 Other -06 Other Key Programming
508 Smart Key Other Other Smart Key System
508 Ordinary Key Other Other Key Programming
408 Other Other Other Key Programming

Series Origin Year Fuel Type Function
C4 Other Other Other Key Programming
Triomphe Other Other Other Key Programming
C5 Other Other Other Key Programming
359 Quatre Other Other Key Programming
C4L Ordinary Key Other Other Key Programming
C4L Smart Key Other Other Smart Key System
Classified by System Smart Key Other Other Smart Key System
Read PIN Code Other Other Other Read PIN Code
Classified by System Ordinary Key Other Other Key System

Series Origin Year Fuel Type Function
Classified by System Smart Key Other Other Immobiliser System 2
Classified by System Smart Key Other Other Immobiliser System 1

Guide: lonsdor k518ise programs renault smart key immo2


3. Tell short of PSA, Renault key

PSA: ID33, ID45, ID46

ID46 transponder 7936 or remote key (CE0523 CE0536 ASK FSK)



IR, id33, 4d60, 46 hitag2, Hitag AES, Hitag 3 (some dacia 2013+)

7936 need precode, remote need precode with good RCF config


So if you want the tool, it need you just money, but to do the job, it need you the time and pain (learning, training…)

China clone auto key chip here:



  1. No tool will do everything
  2. 1st you need knowledge before tools else you will buy tools that you never use
  3. Learn ,learn and learn some forums (i.e DK) are good platform and look for people within your location who are willing to help.
  4. Respect and appreciation is a key.




FNR key prog 4-in-1 download with car list

FNR key prog 4-in-1 download free:

FNR 4-in-1 download: (100% tested & works good)

Software version: key prog v1.1.2

2.renault key prog: v2.3.1 key prog: v2.3.1 incode calculator:1.0

How to install FNR Key Prog 4-in-1:

1.Open the “ford install” folder,install the application “fordupdate1.1.1″


2.Copy the files in the folder “ford crack” to the directory of “TrueCode”.


3.Copy “FORD CODE CALCULATOR” and “Renault nissan” to the directory of “TrueCode”.

4.Copy the file “hid.dll” from folder “et199-nissan-hid”.


5.Connect the dongle with computer,then install the driver from CD.

How to solve “run time error, patch not found” for FNR 4-in-1:

Question: Hi, as that, I go to you because I need help to install correctly FNR Key Prog 4-in-1, bought in china.

I have followed all the installation instructions correctly, and at the end of the installation program does not work properly, the icon TRUECODE.EXE does not work, whenever I try to open that application, jump an error window, more I put below the image of the error.

Do you know how to solve this error? thank you.


Reply: The solution to your problem is to install Windows XP directly on C:\

Probably you have it now installed on partition letter other then C

Have to setup the usb com port (com4) to com12


FNR key prog 4-in-1 car list:

Ford key prog v1.1.2 & Ford incode calculator V1.0

Ford 1997-2011: clear the keys and add new keys…OK

Ford: calculate incode

use the INCODE to calculates to match PCM to PATS module when installing new or secondhand FORD diesel pumps; but you will need another diagnostic tool like VCM2 clone to do Ford pump matching.

Transit Connect (2007-2011)

Focus (2004-2011) non-prox

Fusion (2002-2011)

C-Max (2003-2010)

Cougar (1998-2002)

Fiesta (1998-2002)

Fiesta (2002-2008)

Focus (1998-2004)

KA (1998-2000)

KA (2000-2008)

Mondeo (1998-2007)

Puma (1997-2001)

Transit (2000-2006)

Transit Connect (2002-2007)

Renault key prog v2.3.1

key programming and pin code retrieval system!

add a blank key (card) for many Renault and Nissan cars via OBD

DO NEED any PIN code!

program keys/cards AUTOMATICALLY

for Renault and Nissan based vehicles using HITAG-2 keys/cards – with the 12 character pincode.

use it for any security/coding/replacement of Renault body control UCH ECUs (require a Renault Clip or DEC Superscan)

Clio II

Laguna Ph1/Ph2

Espace Ph1/Ph2

Velsatis II Ph1/Ph2


ScenicII (<2007)

Kangoo Ph2


Master Ph1/Ph2







scenicII (>2007)

Nissan key prog: v2.3.1

pincode reading / key programming…OK

Nissan Micra K12 and Nissan

In details…

It helps to correctly install & use FNR Key Prog 4-in-1