In this instruction,keycuttingmachine.org will show you guide on how to use Lonsodr K518 to do all keys lost programming for Nissan X-trail 2017.
Procedures:
Connect Lonsdor K518 programmer to Nissan X-trail obd port,then enter menu to select [Nissan]
After then enter key programming option and select [Select from vehicle]
Select [Europe]
Select [X-Trail]–>[T32]
Select [Proximity smart]–>[Program smart key]
It will prompt you with notice massage:
“Do not perform key programming on the BCM with Part NO.284B1-4CB1A…”
Press [OK] to continue
Turn on emergency light/Turn ignition OFF,then click [OK] to continue
All keys will be deleted,press [OK] to continue
Wait for system connecting
Now please press and release car start button,put the logo end of the 1st smart key close to the button,until the dash lights on and the security flashes 5 time,then click [OK] to continue
Press car start button once to turn ignition OFF,then click [OK] to continue
Programming complete,Program next key?
Press [OK] to proceed.
Repeat operation
After complete,it will prompt you with massage
“Please press car start button,put the logo end of the 1st smart key on the button until the dashboard makes sound”
Press car start button once to turn ignition OFF
Please press once “start/stop” button to check if the engine can be started,then press [OK] to proceed.
Programming complete
Now you can test the new key on Nissan X-trail.
Lonsdor K518ISE Programmer details:
http://www.uobdii.com/wholesale/lonsdor-k518ise-key-programmer.html
