How to use SKP900 program remote key for 2013 Range Rover Evoque

This blog will show a tested success case: for 2013 Range Rover Evoque with only one working remote key, you can program new remote key by using SKP900 key programmer about 3 minutes!

skp900-program-remote-key-range-rover-evoque-1

Below are operating steps:

Connect SKP-900 with car via OBD port then power up SKP-900.

Choose function “IMMOBILIZER”

skp900-program-remote-key-range-rover-evoque-2

Choose car brand “LAND ROVER”

skp900-program-remote-key-range-rover-evoque-3

Select year “2012-2013” then “RANGE ROVER (2012-)”

skp900-program-remote-key-range-rover-evoque-4

Select model “EVOQUE (2012-)”

skp900-program-remote-key-range-rover-evoque-5

Wait it is loading…

Choose “IMMOBILIZER SYSTEM” and press car start button to turn on ignition.

skp900-program-remote-key-range-rover-evoque-6

Choose “ADD KEYLESS TYPE 1” it needs at least one registered keyless.

skp900-program-remote-key-range-rover-evoque-7

Put the registered keyless close to car gear shift then turn ignition off.

SKP-900 key programmer will turn car ignition on, press YES button.

skp900-program-remote-key-range-rover-evoque-8

Now car key number is 3.

skp900-program-remote-key-range-rover-evoque-9

In 5 seconds quickly press the new key Unlock button.

skp900-program-remote-key-range-rover-evoque-10

Now car key number detected is 4.

skp900-program-remote-key-range-rover-evoque-11

Again quickly press the new key Unlock button in 5 seconds.

ADAPT SUCCESS!

skp900-program-remote-key-range-rover-evoque-12

SuperOBD SKP900 successfully programs a new key for 2013 Range Rover Evoque! New key is working!

skp900-program-remote-key-range-rover-evoque-13

Sales keycuttingmachine.org