Superobd SKP900 program smart remote Nissan Sylphy 2013 year

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.

Tool to use:

Superobd SKP900, $429 at uobdii.com

Nissan Calculator, $139 at uobdii.com

superobd-skp-900-7new-pin-code-caculator-for-nissan-6

Purpose:

Calculate Pin code and then program smart remote key

Procedure:

  1. This is smart remote key …

nissan-smart-remote-key-01

  1. Turn ignition on

turn-ignition-on-02

  1. Open Superobd SKP900, come to menu then choose “Nissan” under IMMOBILIZER.

skp900-nissan-03

  1. Select “New Structure”.

skp900-nissan-04

  1. Select “Smart key”, loding…

skp900-nissan-05

  1. Select “KEYLESS SYSTEM”.

skp900-nissan-06

  1. Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.
  1. Read BCM code

skp900-nissan-08

  1. Insert key and turnning on “Yes” to continue

skp900-nissan-09

  1. Read out BCM code

skp900-nissan-10

  1. Use Nissan Calculator to find Pin code.

skp900-nissan-11

  1. Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator

skp900-nissan-12

  1. Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.

skp900-nissan-13

  1. Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

skp900-nissan-14

  1. All keyless will be deleted.

skp900-nissan-15

  1. Enter Pincode 2166

skp900-nissan-16

  1. Check INPUT VALUE 2166 “Yes” OK “No” Return.

skp900-nissan-17

  1. Activate success wait new keyless.

skp900-nissan-18

  1. Key number 1 and number 2

skp900-nissan-19

  1. Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.

skp900-nissan-20 skp900-nissan-21 skp900-nissan-22 skp900-nissan-23

  1. Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.
  1. Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.

skp900-nissan-24

  1. Test remote, it can work.

skp900-nissan-25

(SKP-900 Update) How to update SuperOBD SKP900 Key Programmer?

Do you need a clear tutorial for SKP-900 Update? This blog will guide you How to update SuperOBD SKP900 Key Programmer step by step! Check below!

Do you need a clear tutorial for SKP-900 Update? This blog will guide you How to update SuperOBD SKP900 Key Programmer step by step! Check below!

 

Step1. Download newest software from SuperOBD official website or blog.uobdii.com.

Free download SKP900 V4.5 software:

http://blog.uobdii.com/superobd-skp-900-skp900-updated-to-v4-5-free-download/

Download SKP900 Update Tool V2.4:

http://superobd.com/UploadImage/20141815344369.rar

Download SKP900 USB Driver:

http://superobd.com/UploadImage/20141311138756.rar

 

Step2. Connect SKP-900 key programmer to computer using the USB cable.

skp900-key-programmer-update-guide-1

Register SKP-900 official website in member centre. Download the update software and unzip it to get the “update bin file”.

skp900-key-programmer-update-guide-2 skp900-key-programmer-update-guide-3

Step3. Extract SKP900 Update Tool V2.4 zip file and SKP900 USB Driver zip file. Now install SKP900 driver: go to “My Computer” → “Properties” → “Hardware” → “Device Manager”

skp900-key-programmer-update-guide-4

The USB serial will not be found now. Click the “Scan” button to scan the hardware.

skp900-key-programmer-update-guide-5

Step4. You will see a Found New Hardware Wizard for “USB-Serial”, click “Next”.

skp900-key-programmer-update-guide-6

Check the checkbox “Include this location in the search” then click “Browse”. Choose “USB driver” folder then click “OK”.

skp900-key-programmer-update-guide-7

Click “Next” then “Finish”.

Step5. There comes another Found New Hardware Wizard for “USB Serial Port”, choose the option “Install from a list or a special location”, click “Next”.

skp900-key-programmer-update-guide-8

Click “Browse”, choose “USB driver” folder then click “OK”. Click “Next” then “Finish”.

Now SKP900 USB driver install completely.

skp900-key-programmer-update-guide-9

Step6. Open SKP900 Update Tool V2.4 folder then open SKP900 Update Tool V2.4.

skp900-key-programmer-update-guide-10

Open the update bin file then click “Update” to start SKP900 update. (Remember not to disconnect SKP-900 form computer while updating.)

skp900-key-programmer-update-guide-11 skp900-key-programmer-update-guide-12

The whole process will cost about 37 minutes, just be patient to wait it complete. And after that all OK, you can start to use newest SKP900 software!

SKP900 read pin code& program key for VW Bora all key lost

What tool do you need when a VW Jetta Bora lost all key and want to program a new key? According to uobdii.com engineers you are advised to use SKP 900 Key Programmer!

What tool do you need when a VW Jetta Bora lost all key and want to program a new key? According to uobdii.com engineers you are advised to use SKP 900 Key Programmer! Below is how-to guide for your reference.

First use SuperOBD SKP-900 to read VW Bora pin code then to program a new key.

Step1. Turn ignition on and connect SKP900 with car via OBD port. Choose “Immobilizer”→ “VW” → “Read Pin code1” → “Password Reading SYS1”

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-1 superobd-skp900-read-pin-code-program-key-vw-jetta-bora-2 superobd-skp900-read-pin-code-program-key-vw-jetta-bora-3

Wait a minute and SKP900 read out the pin code as 3904.

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-4

Step2. Back to “VW” menu and choose “Jetta 10-”.

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-5

Choose “Immobilizer System” then “Yes”. It will show you car control computer info, click “Yes”.

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-6

Step3. Choose “Program Key”

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-7

Enter the pin code 3094 and confirm.

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-8

It will show current key number: 1

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-9

Input key number to be programmed: 1

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-10

Step4. Now use all matching keys to turn on ignition. It will soon show “Matching Finished”.

superobd-skp900-read-pin-code-program-key-vw-jetta-bora-11

In this way you can use SKP-900 Car Key Programmer to program a new key for VW Bora all key lost situation!

SuperOBD SKP900 Program key for Nissan Versa 2012

This blog will teach you how to program Nissan versa 2012 key using SuperOBD skp900.

This blog will teach you how to program Nissan versa 2012 key using SuperOBD skp900.

Brief description of SKP900:

To be honest, it is a must need tool for all locksmith and Automotive mechanic! SKP900 is probably the best OBD2 key programmer in today’s market. Its functions can match original X300 Pro3, Zed Full, T-Code, AVDI, even more powerful, but operation easier and price much cheaper.

Now let’s go to the detailed procedure:

Tool needed: SuperOBD skp900

Vehicle model: Nissan versa 2012

First connect SKP900 with Versa via OBD2 port

Select [IMMOBILZER]

SuperOBD-SKP900-program-nissan-versa-1

Select vehicle model [NISSAN]->[NEW STRUCTURE]-> [KEY2], loading…

SuperOBD-SKP900-program-nissan-versa-2 SuperOBD-SKP900-program-nissan-versa-3 SuperOBD-SKP900-program-nissan-versa-4

Choose [IMMOBILIZER SYSTEM], press [YES] button yo continue

SuperOBD-SKP900-program-nissan-versa-5

Choose OBDII ADAPTER, just Press [YES] to continue

SuperOBD-SKP900-program-nissan-versa-6

Select [READ BCM CODE] and press [YES]

SuperOBD-SKP900-program-nissan-versa-7

Insert the key and turn ignition on and press [YES]

SuperOBD-SKP900-program-nissan-versa-8 SuperOBD-SKP900-program-nissan-versa-9

It will show you the BCM CODE, press NO to go back

SuperOBD-SKP900-program-nissan-versa-10

Then choose [KEY PROGRAM]

SuperOBD-SKP900-program-nissan-versa-11

It prompt you insert key and turn ign on, you have done this, just press [YES]

SuperOBD-SKP900-program-nissan-versa-12

Enter the pin code and press [YES]

SuperOBD-SKP900-program-nissan-versa-13

[YES]

SuperOBD-SKP900-program-nissan-versa-14

It is adapting…

Close ignition switch off -> open ignition switch on

SuperOBD-SKP900-program-nissan-versa-15 SuperOBD-SKP900-program-nissan-versa-16

 

Press [YES]

SuperOBD-SKP900-program-nissan-versa-17

ADAPT success!!

SuperOBD-SKP900-program-nissan-versa-18

SKP900 supported car list:

Skp-900-supported-car-model.pdf

For more information about SKP900, click here:

http://www.uobdii.com/wholesale/superobd-skp-900-key-programmer.html

SuperOBD SKP-900 SKP900 updated to V4.5 (Free download)

Today SuperOBD SKP-900 Key Programmer V4.5 has been released and available to download. In this blog uobdii.com will offer you the free download link and SKP-900 update information.

 Today SuperOBD SKP-900 Key Programmer V4.5 has been released and available to download. In this blog uobdii.com will offer you the free download link and SKP-900 update information.

superobd-skp-900 v4.5
superobd-skp-900-1

SKP900 Key Programmer V4.5 Free Download Link:

http://www.superobd.com/DownLoad/SKP900V4.5.zip

SKP-900 SKP900 V4.5 Update Information (27th Oct, 2016):

-Dodge RAM1500 PIN CODE Read by OBD 2006

-Dodge RAM1500 Remote Key Program 2006

-Correction and add Toyota models: SIENNA; ALPHARD; CAMRY; PRADO; RAV4; CROWN; COROLLA; REIZ; LAND CRUISER; VIOS; TUNDRA; HIGHLANDER; EZ; LEVIN; PRIUS; YARIS; PREVI

Only 1 minute to add Mitsubishi Pajero new key by SKP900

This blog is going to tell you SKP900 key programmer can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

This blog is going to tell you SKP-900 Key Programmer can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

Step1. Start SKP-900 SKP900 then choose “Immobilizer”→ “Mitsubishi”

skp900-program-Mitsubishi-Pajero-new-key-1 skp900-program-Mitsubishi-Pajero-new-key-2

Step2. Choose “System Type” and “Type 1” and “IMMO System”. Next is to turn on the ignition.

skp900-program-Mitsubishi-Pajero-new-key-3

Step3. Choose “Key Adapt” and input the authorize code.

skp900-program-Mitsubishi-Pajero-new-key-4 skp900-program-Mitsubishi-Pajero-new-key-5

It will show “Key Program Success”. Press YES button and insert the new key in 5 seconds then turn ignition on.

skp900-program-Mitsubishi-Pajero-new-key-6 skp900-program-Mitsubishi-Pajero-new-key-7

 

And SuperOBD SKP900 now make new key for Mitsubishi Pajero successfully in 1 minute!

Save

Which Auto key programmer best for American and Asian cars?

Are you confused about which Car Key Programmer is best for American and Asian cars? This blog will recommend three key programmers with different…

Are you confused about which Car Key Programmer is best for American and Asian cars? This blog will recommend three key programmers with different prices: OBDSTAR X-100 PRO, SuperOBD SKP-900 and Tango programmer. The details are as follows:

 

Here you will start from learning OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango programmer separately, then user feedbacks on these three tools, then a short conclusion at last.

 

OBDSTAR X-100 PRO Auto Key Programmer for American and Asian cars

american-asian-car-key-programmer-obdsatr-x100-pro-1

Price: $339

X100 PRO C+D Type function: Immobilizer remote match+ Odometer+ OBD Software

 

OBDSTAR X-100 PRO Programmer supported car list:

http://blog.uobdii.com/obdstar-x100-pro-key-programmer-car-model-list/

 

OBDSTAR X-100 PRO Highlight:  Support EEPROM Function (EEPROM Chip read and Immobilizer initialization)

Note: It doesn’t support Toyota G Chip and Proton.

 

What about OBDSTAR X-100 PRO update?

OBDSTAR X-100 PRO update free online on official website for 1 year.

 

SuperOBD SKP-900 Key Programmer for American and Asian cars

american-asian-car-key-programmer-superobd-skp900-2

Price: $529

SKP-900 can support almost all cars in the world, such as Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on.

 

SKP900 Key Programmer supported list:

http://www.uobdii.com/upload/pro/skp-900-supported-car-model.pdf

 

SKP-900 Key Programmer Highlights:

  1. It can program many car key without need for Pin Code. Besides, it can read Pin Code for many cars.
  2. It support TOYOTA G chip.

 

What about SKP-900 update and token issue?

  1. SKP-900 update free monthly.
  2. SKP-900 need tokens but it is free to add tokens.

 

Tango key programmer for American and Asian cars

american-asian-car-key-programmer-original-tango-3

Price: $1,029

 

What transponders Tango key programmer can do?

Philips Transponders, Temic Transponders, Megamos Transponders, Texas Transponders, Atmel Transponders.

Tango programmer’s features:

  1. It can read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
  2. It can produce working keys by EEPROM dump, identify transponders and clone keys.

 

Tango programmer’s supported car list/ transponder list:

http://www.sinodownloads.com/down/download/PDF/3511073-TANGO-featuresEn.pdf

 

What special functions Tango have? (Tango highlight)

  1. After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
  2. Tango can read kilometers, VIN and transponder types.

 

What about Tango update and token issue?

  1. This Original TANGO Key Programmer with basic software update online free. (Now you can get Free Daihatsu G Chip Authorization support both write and copy at uobdii.com) You need to pay for authorization when add additional capabilities, special function or work it on special car model.
  2. TANGO Key Programmer doesn’t need tokens!

 

User feedbacks on OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango:

 

Very good for Asian and American cars is SKP-900. But I also use Tango. Tango is excellent, but can’t do cars remote locking for example and is all for off car programming (needing XPROG etc)

 

I use X100 pro OBDSTAR. I’m very happy with it. Not perfect but very good!

 

I have x-100 pro and it’s nowhere near as good as SKP900, also Tango in my opinion is much better for off car programming. SKP900 has very good OBD coverage especially American cars. Tango is superb for all difficult and on the bench. Moreover Tango is very good at EEPROM Applications.

 

Conclusion:

There is no a perfect key programmer that can do all car keys in all occasions. But you can find a better one which is good and useful for your own usage. Hope this blog helps.

Save

Save

Save

Save

(How-to guide) SKP900 program Honda CRV key when all key lost

SKP900 key programmer is Hand-held OBD2 car key programmer,supports all key lost for many different car brands. This blog will show you how SK-P900 program Honda CRV…

SKP900 key programmer is Hand-held OBD2 car key programmer,supports all key lost for many different car brands. This blog will show you how SK-P900 program Honda CRV key when all key lost.

Step1. Choose “Immobilizer”→ “Honda”→ “System Type”→ “Immobilizer 2”.

skp900-make-honda-crv-all-key-lost-1 skp900-make-honda-crv-all-key-lost-2

Step2. Choose “Immobilizer System” and turn ignition on. Wait a minute for system adapting.

skp900-make-honda-crv-all-key-lost-3

Step3. Choose “All key lost”

skp900-make-honda-crv-all-key-lost-4

It will ask “Insert key and turn ignition on, indicator light off?” Check and confirm it.

skp900-make-honda-crv-all-key-lost-5

Step4. Input key number: 2

skp900-make-honda-crv-all-key-lost-6

Turn off the key then turn ignition off. It is programming.

skp900-make-honda-crv-all-key-lost-7 skp900-make-honda-crv-all-key-lost-8

Step5. Turn key off in 15 seconds and SKP-900 Auto Key Programmer will show “Adapt success”. Insert a new key in 15 seconds and turn the ignition on.

skp900-make-honda-crv-all-key-lost-9 skp900-make-honda-crv-all-key-lost-10

 

Turn off key in 15 seconds→ turn ignition on→ turn off key→ turn ignition on

Then the indicator light is off

skp900-make-honda-crv-all-key-lost-11

Turn off key→ turn ignition on

Now it will show “Adapt key success” that means SuperOBD SKP900 successfully program Honda CRV key when all key lost!

skp900-make-honda-crv-all-key-lost-12

skp900-make-honda-crv-all-key-lost-13

Honda and Toyota are both Japanese car,if you want to know SKP900 programmer for Toyota read below article:

Program TOYOTA Smart Key using SKP900 key programmer

Save

Save

Save

Save

Copy 46 chip with SKP900 key Programmer and 46/4D/48 Adapter

SKP-900 Key Programmer is Hand-held OBD2 key programmer support almost all cars in the world. Here is the instruction on how to copy 46 chip with SKP900 and 46/4D/48 adapter, hope it helps.

SKP-900 Key Programmer is Hand-held OBD2 key programmer support almost all cars in the world. Here is the instruction on how to copy 46 chip with SKP900 and 46/4D/48 adapter, hope it helps.

46-4d-48-adapter-plus-for-skp900-1superobd-skp-900-1

  1. ConnectSKP-900 and 46/4D/48 adapter.

Plug the SKP-900 key programmer into the vehicle OBD socket.

That’s preparation to copy the original car keys and 46 chips.

  1. Choose Special features into the SKP-900 -> chip key copy-> 46 chip copy, which has four options, according to the order entered were 1-2-3-4.
  2. Firstly enter 1 and read original key ID, then place the original key near the adapter and press [YES], the original key ID will be read.

Note: If reading error, check if the key chip is 46, or adjust the position of the key and reading coil, and re-read the key ID. After reading key ID, press [NO] to return.

  1. Enter 2 to get collector information: place the collector already with collected data near reading coil (refer to the user manual for the collector user manual), press [YES] to go on. At this situation, the collector data indicator (green) will flash, the screen displays the collector data. Then press [NO] to return.
  2. Enter 3 and decode original chip, press [YES] to continue. The screen will display: working, please wait… It normally takes about 5-30 seconds. (Need about 4 minutes in some case). If the decoding failed, please re-collecting data and re-do step 3 and step 4. If the decoding successes, please press NO to return.
  3. Enter 4 and create clone chip, place the copy-able 46 chip near the reading coil, press [YES] to continue, copy successes 1 second later; if not, please adjust the position of the coil and chip, or replace the chip can be copied.

Save

Save

Chip instruction on ID46, ID48, 4C, 4D:http://blog.uobdii.com/chip-instruction-for-handy-baby-car-key-copy-v-6-1-0/

Save

Save

Save